Panasonic KX-T2375ALW operating instructions Call Restriction, To set the call restriction

Page 26

ÒSpecial Features

Call Restriction

You can prevent the unit from dialling phone numbers beginning with speciﬁed digit(s) (1 digit or 2 digits). Phone numbers with the restricted leading digits cannot be dialled out.

To set the call restriction

Make sure that a call is not put on hold.

1

2

3

Press (PROGRAM).

Press (MUTE).

Press (1).

³If you use “1111” as aPIN code (factory set), the display on the right will be shown. There is no need to enter a PIN code. Go to step 6.

³After the PIN code is changed, “– – – –” will be displayed.

4

5

Enter the PIN code (p. 24). (Ex. Your PIN code is “1234”.)

Press (PROGRAM).

³If a wrong PIN code is entered, 3 beeps

will sound. Enter a correct PIN code and press (PROGRAM).

³The current setting is displayed. (Ex. “67” is entered as the restricted digits.)

6

7

Enter the number(s) (1 digit or 2 digits) you want to restrict ((0) to (9)). (Ex. “12” is entered as the restricted digits.)

³If you enter a wrong number, press ($) and enter a correct number.

³To change restricted digits from 2 digits to 1 digit, press ($) for 2 digits to change to “– –” and enter 1 digit.

Press (PROGRAM).

³A long beep sounds.

³The unit will return to the standby mode.

³If your unit is connected to a PBX, this function may not operate. Contact your PBX supplier for more information.

When dialling a phone number with the restricted leading digit(s), the dialled number will ﬂash on the display, but not dialled out.

26

Image 26

Contents Model No. KX-T2375ALW For your future reference Accessories includedBefore Initial Use Serial No Date of purchaseContents DIAL\LOCK Button p VolumeLocation of Controls Headset Jack p Display p Ringer Selector pDisplay Settings Installing the BatteriesConnecting the Handset/Telephone Line Cord After connection, lift the handset to check for a dial toneConnecting a Communication Device Make sure that a call is not put on hold Press Program to store the settingProgramming Summary of Preparations Press MuteTime Adjustment You can select AM/PM or 24-hour clock by programmingPress Setting the LCD ContrastSelecting the Ringer Volume Press 1 toLocks, so the tab holds the handset Wall MountingWall Template Making Calls Using the speakerphoneUsing the speakerphone Press SP-PHONE/HEADSETÛ To redial the last number dialledTo release the hold To increase, press Volume . To decrease, press VolumeTo put a call on hold Press HoldAnswering Calls Talk into the MIC microphoneEnter a phone number, up to 22 digits Speed DiallerStoring Phone Numbers in Memory Press a memory station number 0 toDialling a Stored Number To erase a stored numberPress one of the one-touch auto dial buttons One-Touch DiallerTo store in an Upper memory location Memory location, press the one-touch To store in a Lower memory locationIf the phone number is in an Upper Memory card From an Upper memory locationFrom a Lower memory location Lift the handset or press SP-PHONE/HEADSETFor Analog PBX Line/Long Distance Service Users Special FeaturesHow to Use the Pause Button Muting Your ConversationTurning Music Played During the Hold To turn OFF, press To turn ON, pressPress a dialling button 1 to Recall ButtonSelecting the recall time Press Mute Enter the current PIN code. Ex is entered Setting the PIN CodeEnter a new PIN code using a 4-digit NumberTo set the dial lock To cancel the dial lockDial Lock Enter the PIN code pEnter the PIN code p . Ex. Your PIN code is Call RestrictionTo set the call restriction Connecting the Optional Headset to the Unit Using the Optional HeadsetTo cancel the call restriction While using the headset, press Volume or Make sure to install the batteriesTo adjust the headset receiver volume 4 levels Making/Answering CallsBattery Replacement Battery PrecautionsProblemRemedy Before Requesting HelpProblem Remedy Safety Instructions Installations EnvironmentUseful Information Important Information Instructions to customerService difficulties PQQX13367ZA-BM F0102-0D