Speed Dialer
Speed dialer
You can store up to 10 numbers in the memory stations. The dialing buttons M0N to M9N function as memory station numbers. Do not press any memory stations before storing to prevent misoperation.
Note:
R If a phone number is stored in a dialing button which already contains a phone number, the old number will be erased.
Storing phone numbers
1Lift the handset.
2MPROGRAMN
R Status indicator light will start double flashing at an interval.
3Enter a phone number up to 32 digits.
R If a pause is required for dialing, press MPAUSEN. A pause stored in a phone number counts as one digit.
R If a wrong number is entered,
press M
DIAL LOCK/EXITN and repeat step 2.
4MAUTO/LOWERN → Press a memory station number (M0N to M9N). R A long beep sounds.
R Status indicator light will turn OFF.
5When finished, hang up.
Note:
R We recommend you make a note of which phone numbers are stored in which dial keys.
Erasing a stored number
1Lift the handset.
2MPROGRAMN
R Status indicator light will start double flashing at an interval.
3MAUTO/LOWERN → Press a memory station number (M0N to M9N) for the phone number to be erased. R A long beep sounds.
R Status indicator light will turn OFF.
4When finished, hang up.
Dialing a stored number
1Lift the handset or press
MSP-PHONEN.
R Status indicator light will turn ON after pressing
2MAUTO/LOWERN → Press the memory station number (M0N to M9N).
3When you finish talking, place the handset on the cradle or press
MSP-PHONEN.
R Status indicator light will turn OFF after pressing
14