Special Programming
Call restriction
You can restrict the unit from dialing phone numbers beginning with specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted leading digits cannot be dialed out, except the emergency number (#) stored in the
Note:
R When call restriction is turned on, you cannot store or erase the emergency numbers in the MEMERGENCYN.
Setting the call restriction
1Lift the handset.
2MPROGRAMN
R Status indicator light will start double flashing at an interval.
3MHOLD/MODEN → M1N
R If you have not changed the unit password (default: 1111), go to step 5.
4Enter the unit password →
MPROGRAMN
R A beep sounds.
R If you have entered the wrong password, error beep will sound. Enter the correct password →
MPROGRAMN
5Enter the number(s) (1 digit or 2 digits) you want to restrict (M0N to M9N) → MPROGRAMN
R A long beep sounds.
R Status indicator light will turn OFF.
6When finished, hang up.
Erasing the restricted number
1Lift the handset.
2MPROGRAMN
R Status indicator light will start double flashing at an interval.
3MHOLD/MODEN → M1N
R If you have not changed the unit password (default: 1111), go to step 5.
4Enter the unit password →
MPROGRAMN
R A beep sounds.
R If you have entered the wrong password, error beep will sound. Enter the correct password →
MPROGRAMN
5MGN → MPROGRAMN R A long beep sounds.
R Status indicator light will turn OFF.
6When finished, hang up.
Changing the unit password
Important:
If you change the password, please make note of your new password. The unit will not reveal the password to you. If you forget your password, consult your nearest Panasonic service center.
1Lift the handset.
2MPROGRAMN
R Status indicator light will start double flashing at an interval.
3MHOLD/MODEN → M5N
4Enter the current
R If you have entered the wrong password, error beep will sound. Enter the correct password →
MPROGRAMN
5Enter the new
MPROGRAMN
R A long beep sounds.
R Status indicator light will turn OFF.
6When finished, hang up.
15