Making/Answering Calls
Making calls
1Lift the handset and dial the phone number.
2When you finish talking, place the handset on the cradle.
Using the speakerphone
1MSP-PHONEN
R Status indicator light will turn ON.
2Dial a phone number.
R Speak alternately with the other party.
R If you have misdialed, press
3When you finish talking, press
R Status indicator light will turn OFF.
Note:
R For best performance, use the speakerphone in a quiet environment. If necessary, adjust the speaker volume.
R You can switch to the handset by lifting it up. To switch back to the speakerphone, press
Adjusting the handset or the speaker volume
Press VOL.MDN or VOL.MCN repeatedly while talking.
R After hanging up, the volume level will be saved.
To redial the last number dialed (32 digits max.)
1Lift the handset or press
R Status indicator light will turn ON after pressing
2MREDIALN
R Redial will dial the last number you dialed manually.
3When you finish talking, place the handset on the cradle or press
R Status indicator light will turn OFF after pressing
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service.
Example: If you need to dial the line access number 9 when making outside calls with a PBX:
1Lift the handset or press
R Status indicator light will turn ON after pressing
2M9N → MPAUSEN
3Dial the phone number.
Note:
R A 3.5 second pause is inserted each time MPAUSEN is pressed. Repeat as needed to create longer pauses.
Answering calls
When a call is being received, the unit rings and the ringer indicator flashes quickly. You can answer the call by simply lifting the handset.
Using the speakerphone
1
R Status indicator light will turn ON.
2When you finish talking, press
R Status indicator light will turn OFF.
8