Panasonic KX-TDA50 Structure of this Manual, About the Other Manuals, Trademarks

Page 10

Introduction

This Installation Manual is designed to serve as an overall technical reference for the Panasonic Hybrid IP- PBX, KX-TDA50. It provides instructions for installing the hardware, and programming the Hybrid IP-PBX using the KX-TDA50 Maintenance Console.

The Structure of this Manual

This manual contains the following sections:

Section 1 System Outline

Provides general information on the Hybrid IP-PBX, including the system capacity and specifications.

Section 2 Installation

Describes the procedures to install the Hybrid IP-PBX. Detailed instructions for planning the installation site, installing the optional service cards, and cabling of peripheral equipment are provided. Further information on system expansion and peripheral equipment installation is included.

Section 3 Guide for the Hybrid IP-PBX PC Programming Software

Explains the installation procedure, structure, and basic information of the KX-TDA50 Maintenance Console.

Section 4 Troubleshooting

Provides information on the Hybrid IP-PBX and telephone troubleshooting.

About the Other Manuals

Along with this Installation Manual, the following manuals are available:

Feature Manual

Describes all basic, optional and programmable features of the Hybrid IP-PBX.

PC Programming Manual

Provides step-by-step instructions for performing system programming using a PC.

PT Programming Manual

Provides step-by-step instructions for performing system programming using a PT.

Operating Manual

Provides operating instructions for end users using a PT, SLT, PS, or DSS Console.

About the software version of your Hybrid IP-PBX

The contents of this manual apply to Hybrid IP-PBXs with a certain software version, as indicated on the cover of this manual. To confirm the software version of your Hybrid IP-PBX, see "How do I confirm the software version of the PBX or installed cards?" in the FAQ of the PC Programming Manual, or "[190] Main Processing (MPR) Software Version Reference" in the PT Programming Manual.

Trademarks

•Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

•Intel and Celeron are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

•All other trademarks identified herein are the property of their respective owners.

•Screen shots reprinted with permission from Microsoft Corporation.

10

Installation Manual

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Hybrid IP-PBX Model No. KX-TDA50Compatible Panasonic Proprietary Telephones Incompatible Panasonic Proprietary Telephones List of AbbreviationsImportant Safety Instructions Installation Manual Precaution Installation Manual Password Security Product Service When you ship the productFor Future Reference About the software version of your Hybrid IP-PBX Structure of this ManualAbout the Other Manuals TrademarksIncidence of Harm to the Telephone Lines Notification to the Telephone CompanyRinger Equivalence Number REN Trouble with this equipmentCombined Use with Alarm Equipment Keep the Software UP to Date with the Latest DataFor Cell Station Table of Contents Connection of Peripherals 120 Power Failure Connections 124116 Starting the Hybrid IP-PBX 125Installation Manual Section System Outline Computer Telephony Integration CTI Features Networking FeaturesBuilt-in Small Call Center Features System HighlightsPortable Station PS Features Voice Mail FeaturesParalleled Telephone Features Hospitality FeaturesMain Unit Basic System ConstructionConstruction of Main Unit System Connection Diagram Hybrid IP-PBXHybrid IP-PBX Optional Equipment Optional EquipmentModel No Model Name Description Maximum Quantity Model No Model Name Description Maximum Quantity Specifications General DescriptionWeight when fully mounted DimensionExtension Connection Cable Characteristics Maximum Terminal Equipment System CapacityMaximum CO Line and VoIP Line Line Type Maximum NumberCalculation Example MEC Card CalculationMEC Card Calculation Equipment Type MEC FigureAC Adaptor Selection Section Installation Safety Installation Instructions Before InstallationBefore Installation Installation PrecautionsBefore Installation Installation of the Hybrid IP-PBX UnpackingNames and Locations Opening/Closing the Covers Opening the CoversRemoving the Front Cover Removing/Attaching the Front CoverAttaching the Front Cover Closing the Covers LED Indications Installation of the SD Memory CardIndication Color Description Frame Ground Connection Test ProcedureConnect the frame of the Hybrid IP-PBX to ground Slot Restrictions Installing/Removing the Optional Service CardsSlot Position Card Slot Number Type MaxInstalling Optional Service Cards Card Slot Number TypeInstallation of the Hybrid IP-PBX Installation of the Hybrid IP-PBX To detach the LED holder To attach the LED holderInstallation of the Hybrid IP-PBX Cable Handling Installation of the Hybrid IP-PBX Installation of the Hybrid IP-PBX Removing the Optional Service Cards Types of Connectors Connector Type Pin Number Used forWall Mounting KX-TDA50 Mounting on Wooden WallMounting on Concrete or Mortar Wall Installation of the Hybrid IP-PBX Attaching a Ferrite Core Attaching to an RJ45 ConnectorFor the IP-EXT4 Card Wall Mounting AC Adaptor Mounting on Concrete or Mortar Wall Install a screw here 110 mm Reference for Wall MountingInstallation Surge Protector InstallationOverview Outside Installation Installation of a Ground RodInstallation of the Hybrid IP-PBX Function Information about the CO Line CardsLCOT4 Card KX-TDA5180 Pin AssignmentsAccessories included none User-supplied not included none 2 CID4 Card KX-TDA5193User-supplied not included RJ45 connector IP-GW4 Card KX-TDA5480RJ45 Connector 10BASE-T/100BASE-TX Signal Name Input I/Output O FunctionInformation about the Extension Cards 1 HLC4 Card KX-TDA51702 DLC4 Card KX-TDA5171 3 SLC4 Card KX-TDA5173 4 PLC4 Card KX-TDA5175 5 DLC8 Card KX-TDA5172 6 SLC8 Card KX-TDA5174 7 PLC8 Card KX-TDA5176 RJ45 Connector 100BASE-TX IP-EXT4 Card KX-TDA5470LED Indications Information about the Other Cards User-supplied not included Copper wire1 DPH4 Card KX-TDA5161 Pin Terminal Block Connection Diagram for External Sensors and External Relays 100 ΩECHO8 Card KX-TDA5166 3 MSG2 Card KX-TDA5191 4 SVM2 Card KX-TDA5192 EXT-CID Card KX-TDA5168 MEC Card KX-TDA5105 Removing the MEC Card RMT Card KX-TDA5196 Removing the RMT Card Connection of Extensions PT-interface CS DSS ConsoleKX-T7600 series Other With APT Parallel Connection of the ExtensionsWith DPT Using an EXtra Device Port Using a Modular T-AdaptorWith KX-T7600 Series DPT With Other DPT DptsltWith KX-T7600 Series DPT Digital EXtra Device Port Digital XDP ConnectionBack View of DPTs To TEL To Main Unit First Party Call Control CTI Connection CS Cell Station KX-T0141 Connection of 2.4 GHz Portable StationsOverview PS 2.4 GHz Portable Station KX-TD7680/KX-TD7690Prepare the CS for site survey Procedure OverviewInvestigate the installation site Conduct the site surveyFinish the site survey Mount the CS on the wallSite Planning Characteristics of Radio WavesUnderstanding the Radio Waves Object Material Transmission Tendency CS Coverage Area Radio Signal Strength LevelsSite Survey Preparation CS installation plan Example Installing in a Room Separated by Interior WallsThings to take note DIP Switch Setting and Installing the CS Temporarily for Site SurveyBefore Site Survey Connection of 2.4 GHz Portable Stations Testing the Radio Signal Strength Site SurveyPS CS NO.1 LEVEL12 Referring to the Stored Scan Data Deleting the Stored Scan Data After Site Survey Connecting a Cell Station to the Hybrid IP-PBX Accessories and User-supplied Items for the CSConnecting the CS Entering the System Programming Mode Registering the PS690 Setting the System LockWhen the PS has not been registered yet PS RegistrationSetting the PIN for PS Using the KX-TD7680 System Lock PasswordSetting the PIN for Hybrid IP-PBX 692691 Testing the OperationPS Termination Wall Mounting 71 mm 13/16 Install a screw here Installing the Doorphone KX-T30865 Maximum Cabling DistanceInstallation Manual Connection of Doorphones DoorphoneDoor Opener External Sensor External Relay Device Connection of Peripherals Connection of PeripheralsPC/Printer via RS-232C Connection ChartsPager Pin AssignmentsSignal Ground SG For connecting a printer/PC with a 25-pin RS-232C connectorRS-232C Signals Receive Data RXD…inputPC/CTI Server via USB version Power Failure Connections Power Failure ConnectionsUsing Analog CO Line Card and Super Hybrid Ports Starting the Hybrid IP-PBX System Initialization ProcedureStarting the Hybrid IP-PBX Starting the Hybrid IP-PBX Starting the Hybrid IP-PBX Confirming the CO Line Connection Turning off the Hybrid IP-PBXSection Guide for the Hybrid IP-PBX PC Programming Software KX-TDA50 Maintenance Console*1 OverviewSerial Interface Connection ConnectionConnection LAN Connection via IP-GW4 CardExternal Modem Connection Installing the KX-TDA50 Maintenance Console Installation of the Hybrid IP-PBX PC Programming SoftwareInstalling and Starting the KX-TDA50 Maintenance Console System RequirementsStart the KX-TDA50 Maintenance Console from the Start menu InstallerInstallation of the Hybrid IP-PBX PC Programming Software Installation of the Hybrid IP-PBX PC Programming Software Section Troubleshooting Troubleshooting InstallationProblem Probable Cause Solution Cause CO line is connected to the T2/R1 Operation Problem Probable Cause Solution Using the Reset Button OperationError Log Display Format Troubleshooting by Error LogDescription Description Section Appendix Psmpr Software File Version Changed ContentsRevision History New OptionsPsmpr Software File Version Psmpr Software File Version System Capacity IP-GW4 Card KX-TDA5480 Connection Revision History Index Numerics MOH Index Reference for Wall Mounting Panasonic Puerto Rico, Inc Copyright
Related manuals
Manual 58 pages 2.3 Kb Manual 160 pages 35.74 Kb Manual 378 pages 21.06 Kb
Top Page Image Contents