Panasonic Troubleshooting for KX-TDA50 IP Phone: Understanding the Reset Button

4.1 Troubleshooting

4.1.4Using the Reset Button

If the Hybrid IP-PBX does not operate properly, use the Reset Button. Before using the Reset Button, try the system feature again to confirm whether there definitely is a problem or not.

CAUTION

In order to avoid possible corruption of data on the SD Memory Card, please ensure that the "SD ACCESS" LED is off before pressing the Reset Button.

Notes

•When the System Initialize Switch is set to the "NORMAL" position, pressing the Reset Button causes the following:

–Camp-on is cleared.

–Calls on hold are terminated.

–Calls on exclusive hold are terminated.

–Calls in progress are terminated.

–Call park is cleared.

Other data stored in memory, except the above, are not cleared.

•Be aware that pressing the Reset Button with the System Initialize Switch in the "SYSTEM INITIALIZE" position clears all data stored in the Hybrid IP-PBX. Do not perform this operation unless you intend to delete all data from the Hybrid IP-PBX.

Operation

If the Hybrid IP-PBX does not operate properly:

1.Slide the System Initialize Switch to the "NORMAL" position.

2.Press the Reset Button for about 1 second.

RUN Indicator

ALARM Indicator Reset Button

System Initialize Switch

144 Installation Manual