Using the Handset Phonebook
Entering Characters
You can enter characters and digits using the dialing keys.
You can select one of 3 character modes by pressing the Right Soft Key while entering a name. The function icon above the soft key displays the current character mode.
See “Character Mode Table” (page 27) for available characters.
A, a
B, b
C, c
2
To change the character mode while editing a name in the Phonebook, press
the Right Soft Key.
Alphabet Numeric Extended
Example: To enter “Anne” in Alphabet Mode.
2 
6 
6
6 
6
3
3
•To switch between uppercase and lowercase, press 
.
•To enter a character located on the same dialing key as the previous character,
move the cursor by moving the Joystick 
, then enter the desired character.
•If you enter a different character by mistake, move the Joystick 
to highlight
the character, press 
to delete it, then enter the correct character.
CLR
• To clear an entire line, press 
for more than 1 second.
CLR
• To move the cursor, move the Joystick 
.
26