Hold Key, Meeting Mode Key, RECALL/FLASH Key

Location of Controls

1TALK/SP-PHONE (Speakerphone) Key: Used to make or answer calls, or toggle between the two conversation modes (Receiver/Hands-free*) during a conversation.

*You can talk with the other party alternately through the speaker in a quiet room.

2HOLD Key:

Used to place a call on Hold.

3Meeting Mode Key:

Used to turn Meeting Mode on or off when pressed for more than two seconds in standby mode.

4RECALL/FLASH Key:

Used to disconnect the current call and make another call without hanging up, or answer a Call Waiting from the telephone company.

5Left/Right Soft Key:

Used to select the function displayed directly above each key. Functions displayed depend on the state of use.

6POWER/CANCEL Key:

Used to end calls, exit the Phonebook or Function mode, or turn the handset on or off.

7Joystick:

Used to adjust the ringer/receiver volume, select the Function menus and the function displayed directly above it, and move the cursor to select a desired item.

8TRANSFER/CLEAR Key:

Used to transfer a call to another party, or clear digits or characters.

9INTERCOM Key:

Used to make or answer intercom calls.

Key Lock

You can lock all keys other than the Joystick while the handset is in standby mode.

<Displayed Icon>

Unlocked Locked

Press the Joystick for more than

2 seconds to lock/unlock.

Meeting Mode

You can set the handset to prevent incoming calls from ringing. This can be useful in situations where you do not want to be disturbed, for example during

ameeting.

•During Meeting Mode, functions are:

Function	Status
Microphone volume	Up
Low battery alarm	Off
Key tone	Off
Ringer/Voice Call/Paging/LCS	Off
Ring On Charger	Off
Vibrate	On
Auto Answer	Off

•During Meeting Mode, you cannot set the Auto Answer feature.

•During Meeting Mode or when Vibrate is set to Vib.& Ring or Vib. Ring, while the handset is on charger:

FunctionStatus

Vibrate*	Off
Ringer	User Setting

*Please note that, if you set the handset on the charger while receiving an incoming call, vibration will stop. Once the vibration stops, the handset will not vibrate again for that call, even if the handset is lifted up again. (If Quick Answer is set, lifting up the handset will answer the call.)