2.0 Connect the Smart-DTA to your local network
You must connect the Smart-DTA to an IP network that provides a DHCP server. Using the included black Ethernet cable, connect the Smart-DTA RJ-45 Ethernet WAN port, labeled ETH (see figure 1), to an Ethernet hub or switch on the same network as your PC. The Ethernet WAN interface is configured as a DHCP client.
Smart-DTA
DHCP
Server
| ETH |
| port |
PC | Ethernet Hub |
| or Switch |
| Figure 1. Connecting the Smart-DTA to the network via a hub or switch |
Smart-DTA Quick Start Guide | 3 |
