Philips M1351A, M1353A manual Connecting PC to Monitor Loading Service Program Using

31

pegserv

(or another drive)

Service Socket

If you are using Windows 98/ NT: Start the service program by double-clicking on the pegserv icon or on the filename pegserv-exe

3. The program is now loaded and ready for use.

When the program has been loaded onto your PC, the main menu is displayed. (If the menu is not displayed, an error message is displayed along the bottom of the screen.)

n

If you want to load the program from drive A: i. Insert the program disk into drive A:

ii. Change to drive A: and enter:

pegserv

If the program files are contained in a directory, change to that directory and enter:

2. nLoad the program by doing one of the following:

n

Con ect the cable from the COM1 port of the PC to the service socket (1).

1. Switch on both the monitor and the PC.

Figure 4-2

Configuring the Monitor Using a PC

Connecting the

PC to the

Monitor

Loading the

Service

Program

Using the

Service

Program

Chapter 4 Configuring the Monitor