Philips M1353A, M1351A manual Stepper Motor

Stepper Motor

Stepper Motor

To replace the stepper motor:

1.Remove the two screws securing the stepper motor to the recorder chassis.

2.Replace the stepper motor.

3.Refit screws but do not tighten! The upper slot on the stepper motor allows fine adjustment when meshing the gears together.

4.Close the drawer assembly.

5.Gently, mesh the stepper-motor gear with that of the paper roller.

Caution

Do not press the gears together or exert any pressure on the stepper-motor spindle.

When in place, tighten the two screws.

154 Chapter 11 Replacing Parts