Philips M1351A, M1353A Configuring the Monitor Using Barcodes, Configuring the Monitor Using a PC

Configuring the Monitor Using Barcodes

Configuring the Monitor Using Barcodes

The time format, date format, IUP scale and paper format can be set using barcodes. To select a setting using a barcode, read the required barcode from the separate Feature Setting Sheet provided with the Barcode Reader Kit.

To configure the Modem Interface Module using a Barcode Reader, refer to “Using the Modem Setup Barcodes” on page 164.

Configuring the Monitor Using a PC

The service program (M1360-68875) allows you to carry out various extended configuration and service functions on the monitor. Contact your Philips Sales Office for details.

The Software Program is supplied in a kit which contains:

l3.5 inch disk containing the software.

Cable adapter for connecting to a PC.

The program can be run on an industry-standard PC. To use the program with a Vectra, you must replace the adapter on the end of the cable with the one provided, and copy the software onto a disk.

Figure 4-1 Cable for an Industry Standard compatible PC

Chapter 4 Configuring the Monitor 29