Philips M1353A, M1351A NST Timer Paper-Out-Alert, Options NST Timer NST automatic Paper-Out-Alert

Configuring the Monitor Using Pushbuttons

Table 4-3 NST Timer Paper-Out-Alert

Options	NST Timer	NST automatic	Paper-Out-Alert
		recorder off
0	✗	✗	✗
1	✓	✗	✗
2	✓	✗	✗
3	✗	✗	✓
4	✓	✗	✓
5	✓	✓	✓

Note— After you put paper into the recorder, let it run for a few pages (use the advance key) to allow the paper to align itself correctly to the right side.

Examples: How to Change the Time Format and IUP Format using Pushbuttons

Example 1:

To change the time format from AM/PM format to 24-hour format, do the following:

1.Disconnect all transducers from the monitor and disconnect or switch off Telemetry.

2.While pressing , press Test.

3.Press the key to change the setting to 1.

4.Press Test to store the new settings.

Example 2:

To change the IUP format from mmHg to kPa, do the following:

Disconnect all transducers from the monitor and disconnect or switch off Telemetry.

While pressing		, press Test.
Press	repeatedly until C03 is displayed.
Press the		key to change the setting to 1.

Press Test to store the new settings.

28 Chapter 4 Configuring the Monitor