Wireless Transmitter Programming (Continued)
Activate a Transmitter
If a transmitter has been suspended, it can be activated again with these programming steps.
1.If not already in Programming Mode, connect by telephone or use the local keypad. Enter the master password and access programming.
2.Press 
3. Enter the transmitter’s facility code (enter 0 if not used).
4.Press 
5.Enter the transmitter’s ID number.
6.Press 
7.Exit Programming Mode if all programming is complete.
ACTIVATE A TRANSMITTER | PPN 42 |
42#FC#ID#
FC = FACILITY CODE
Delete single Enrolled Transmitter
Delete a single enrolled transmitter from the system.
1.If not alreay in Programming Mode, connect by telephone or use the local keypad. Enter the master password and access programming.
2.Press 
3. Enter the transmitter facility code.
4.Press 
5.Enter the transmitter ID number of the transmitter.
6.Press 
7.Exit Programming Mode if all programming is complete.
DELETE SINGLE ENROLLED TRANSMITTER | PPN 47 |
47#FC#ID#
FC = FACILITY CODE (0 IF UNUSED)
ID = TRANSMITTER ID NUMBER
11