Linear AE-500 manual 51#COUNT#, 58#KEY#ACTION#, 57#LINE 1#LINE 2#, 62#CHIRP#, System Options

Page 12

System Options

For most installations the factory settings for the system will be appropriate. Your installer may have already customized some of the system settings. To change selected system settings, use the following programming steps.

Keypad Lockout Count

The system counts the number of invalid entry codes are entered at the local or remote keypad. The factory setting for the lockout count is fi ve. The lockout value can be from two to seven.

1.If not already in Programming Mode, connect by telephone or use the local keypad. Enter the master password and access programming.

2.Press

3. Enter the number for the lockout count (2-7).

4.Press

5.Exit Programming Mode if all programming is complete.

KEYPAD LOCKOUT COUNT

PPN 51

51#COUNT#

COUNT = NUMBER (2-7) OF INCORRECT

ENTRIES REQUIRED FOR LOCKOUT

FACTORY SETTING: 5 TRIES

Telephone Key Assignments for Residents

Residents use their telephone keys to grant access to visitors. The factory settings are:

• Key 9 assigned to Relay Channel “A”

• Key 5 assigned to Relay Channel “B”

• Key * disconnects the visitor’s call.

The resident’s telephone key numbers can be changed if desired.

1.If not already in Programming Mode, connect by telephone or use the local keypad. Enter the master password and access programming.

2.Press

3. Enter the telephone key number (0-9).

4.Press

5.Enter a number to assign the key’s function:

Enter 1 to assign the key to Relay Channel “A”.

Enter 2 to assign the key to Relay Channel “B”.

Enter 3 to assign the key to disconnect the visitor’s call.

Enter 4 to disable the key.

6.Press

7.Exit Programming Mode if all programming is complete.

TELEPHONE KEY ASSIGNMENTS FOR RESIDENTS

PPN 58

58#KEY#ACTION#

KEY = RESIDENT'S TELEPHONE KEY NUMBER ACTION = 1 FOR RELAY CHANNEL "A" ACTION = 2 FOR RELAY CHANNEL "B" ACTION = 3 FOR VISITOR DISCONNECT ACTION = 4 TO DISABLE THE KEY

FACTORY SETTING:

KEY 9 RELAY CHANNEL "A"

KEY 5 RELAY CHANNEL "B"

KEY*DISCONNECT

Welcome Display Text

The AE-500 display will show a visitor a welcome message alternating with instructions on how to call a resident. The welcome message can be customized to suit the installation.

NOTE: When changing the welcome display, programming the AE-500 from a computer is the preferred method. Refer to the “Programming from the Local Keypad” section of these instructions for details on alphanumeric entry from the keypad.

1.If not already in Programming Mode use the local keypad to enter the master password and access programming.

2.Press

3. Enter the new text for the top line of the display (up to 16 characters).

4.Press

5.Enter the new text for the bottom line of the display (up to 16 characters).

6.Press

7.Exit Programming Mode if all programming is complete.

WELCOME DISPLAY TEXT

PPN 57

57#LINE 1#LINE 2#

LINE 1 = UP TO 16 CHARACTERS TEXT LINE 2 = UP TO 16 CHARACTERS TEXT

FACTORY SETTING: LINEAR ACCESS TELEPHONE ENTRY

Speaker Chirp on Keystrokes

The factory setting will cause the speaker to chirp when each key on the local keypad is pressed. The speaker chirp can be turned off.

1.If not already in Programming Mode, connect by telephone or use the local keypad. Enter the master password and access programming.

2.Press

3. Select the option for keystroke speaker chirps:

Enter 0 to turn OFF the keystroke speaker chirps.

Enter 1 to turn ON the keystroke speaker chirps.

4.Press

5.Exit Programming Mode if all programming is complete.

SPEAKER CHIRP ON KEYSTROKE

PPN 62

62#CHIRP#

CHIRP = 0 FOR KEYSTROKE CHIRP OFF CHIRP = 1 FOR KEYSTROKE CHIRP ON

FACTORY SETTING: KEYSTROKE CHIRP ON

12

Image 12
Contents AE-500 Contents IntroductionOperation Database OverviewSystem Features Programming with a Computer Setting up Multiple Units Press Enter the unit number Exit Programming Mode71#UNIT# Le and click Upload to send the fi le to the unitProgramming Over the Telephone Programming from the Local KeypadFactory Settings Data BackupData Restore Programming Reference02#LENGTH# 21#DIR#NAME#PHONE#22#DIR#NAME#PHONE# 23#DIR#DIR#03#LENGTH# 33#CODE#CODE#Entry Code Programming Wireless Transmitter Programming 41#NUMBER#FC#ID#45#FC#ID# 43#FC#ID#42#FC#ID# 47#FC#ID#Activate a Transmitter Delete single Enrolled Transmitter51#COUNT# 58#KEY#ACTION#57#LINE 1#LINE 2# 62#CHIRP#63#TONE# 64#TIME#65#POS# 94#000000#000000# System UtilitiesRequesting Access with an Entry Code Requesting Access with a Wireless TransmitterRequesting Access with a Visitor Call Resident can use their telephone’s keypad to grant accessTroubleshooting
Related manuals
Manual 1 pages 48.42 Kb