Uniden frs 300 manual Silent Keypad, LCD Backlight, External Microphone and Speaker Optional

Page 13

Silent Keypad

A tone sounds when any button is pressed. This is the initial default setting. This function may be silenced if you wish. To silence the tones, press and hold the MON button while you turn on the radio. If you want to hear the tones again, press and hold the MON button while you turn on the radio. When the radio is turned off and then on again, the last selected setting remains.

This function will also silence call tones and error tones.

LCD Backlight

The LCD display can be illuminated to assist your viewing. Press the light button to turn on the display backlight. The light goes off automatically after 5 seconds.

External Microphone and Speaker (Optional)

Available as an optional accessory. Use only an original Uniden speaker/microphone. Use of any other speaker/microphone may void your warranty.

To purchase your external accessory, contact your local Uniden dealer or call Customer Service at (800) 297-1023 Monday through Friday, 7:00 a.m. to 7:00 p.m. Central time.

10

Image 13
Contents Page Call button ControlsThis device complies with Part 15 of the FCC Rules FCC InformationContents Welcome Belt clip and screws FRS Unit Included in Your PackageBattery Installation Belt Clip Low Battery AlertAdjusting the Volume Using Your RadioTurning the Radio On Choosing a Channel Scan ModeTalking on Your Radio Monitor ModeCall Tone Transmission Locking In Your SelectionLCD Backlight Silent KeypadExternal Microphone and Speaker Optional Problem Solution TroubleshootingChannels Operating Frequency SpecificationsChannel Frequency Prcz@naic.edu.A-1 ReservedTransmitted continuously only while you are talking §95.193 FRS Rule 3 Types of communicationsMemo 409,688 455,679 461,036 521,915 597,104