Uniden frs 300 manual Using Your Radio, Turning the Radio On, Adjusting the Volume

Page 9

Using Your Radio

To get the most out of your new radio, read this reference guide completely before attempting to operate the unit.

Turning the Radio On

2 1

1. Turn the on/off volume control clockwise to turn the unit on.

When you turn on your FRS300, the LCD backlight remains lit for

5 seconds.

2. Turn the control counterclockwise to turn the unit off.

Adjusting the Volume

1.Press the MON button to hear background noise. The “BUSY” icon

and icon appear.

2.Turn the on/off volume control clockwise to increase the volume and counterclockwise to decrease the volume.

You may need to adjust the volume again when audio is heard from the speaker.

6

Image 9
Contents Page Call button ControlsThis device complies with Part 15 of the FCC Rules FCC InformationContents Welcome Belt clip and screws FRS Unit Included in Your PackageBattery Installation Belt Clip Low Battery AlertUsing Your Radio Adjusting the VolumeTurning the Radio On Choosing a Channel Scan ModeTalking on Your Radio Monitor ModeCall Tone Transmission Locking In Your SelectionSilent Keypad LCD BacklightExternal Microphone and Speaker Optional Problem Solution TroubleshootingSpecifications Channels Operating FrequencyChannel Frequency Prcz@naic.edu.A-1 ReservedTransmitted continuously only while you are talking §95.193 FRS Rule 3 Types of communicationsMemo 409,688 455,679 461,036 521,915 597,104