Uniden frs 300 manual Battery Installation

Page 7

Battery Installation

Your FRS300 radio uses three (3) AA ALKALINE batteries for power.

To install the batteries:

1. Make sure your radio is off.

Do not mix old and new batteries to avoid damage to the unit.

2. Release the battery cover clip, then remove the battery cover.

3. Insert three (3) AA ALKALINE batteries according to the polarity symbols on the inside of the battery compartment.

4. Align the battery cover tabs with the

Tab holes

FRS300 tab holes then replace the cover.

 

4

Image 7
Contents Page Call button ControlsThis device complies with Part 15 of the FCC Rules FCC InformationContents Welcome Belt clip and screws FRS Unit Included in Your PackageBattery Installation Belt Clip Low Battery AlertAdjusting the Volume Using Your RadioTurning the Radio On Choosing a Channel Scan ModeTalking on Your Radio Monitor ModeCall Tone Transmission Locking In Your SelectionLCD Backlight Silent KeypadExternal Microphone and Speaker Optional Problem Solution TroubleshootingChannels Operating Frequency SpecificationsChannel Frequency Prcz@naic.edu.A-1 ReservedTransmitted continuously only while you are talking §95.193 FRS Rule 3 Types of communicationsMemo 409,688 455,679 461,036 521,915 597,104