Cobra Electronics CXR725C Choose one of the following, Press the Channel Up or Channel Down

Page 10

Operation

Mode Functions

6.Choose one of the following:

a.Press the Channel Up or Channel Down button to select a CTCSS privacy code (01 through 38) for the channel.

b.Press the Lock/Enter button to switch from CTCSS to DCS. The DCS icon and privacy code numbers will flash on the display. The Channel Up or Channel Down button can then be used to select a DCS privacy code (01 through 104) for the channel.

If “OFF” flashes in place of the privacy code numbers, a privacy code is already set in the opposite (CTCSS

or DCS) system. Press the Channel Up or Channel Down button to cancel the opposite code and select a privacy code from the active system for the selected channel.

7.Choose one of the following:

a.Press the Lock/Enter button to enter the channel/privacy code in the selected memory location. Radio then proceeds to next Memory location, which will blink.

b.Press the Mode button to

enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/ privacy code displayed

before you entered mode functions.

c.Press the Talk button to enter the channel/ privacy code in the selected memory location and exit mode functions. Upon release of the Talk button, the

radio will enter Standby mode on the channel/privacy code just entered.

Introduction

ModeButton

MemoryIcon

ChannelButton

 

 

 

Operation

Customer Assistance

Warranty

To recall a stored memory channel location:

1.Press the Mode button until the Memory icon and the memory location number flash on the display.

2.Press the Channel Up or Channel Down

button to select a memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Talk button to return to Standby

mode on the selected memory location.

A memory location can be reprogrammed at any time it is displayed and flashing. Press the Lock/Enter button to begin.

While recalling a stored memory location,

if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

14

Nothing Comes Close to a Cobra® 15

Image 10
Contents Making Life Easier and Safer Features Product FeaturesWarranty Limited One-Year Warranty on Radios & ChargerCaring for Your microTALK Radio Rechargeable Battery Pack and Desktop ChargerTo install or replace battery pack Estimated operation time on full charge 10 hoursUsing Your Radio Or Channel Down button Selectable HighLow Power OutputChannels Listening for a ResponseTo turn the lock feature on or off Lock FeatureSignal Strength Meter Auto Squelch/Maximum RangeWill be displayed in the following order Mode FunctionsScrolling through Mode Functions Privacy CodesSet Ctcss Privacy Codes To select a Ctcss privacy code Set DCS Privacy Codes To select a DCS privacy codeMemory Locations To turn VOX mode on or offVoice Activated Transmit VOX To set VOX sensitivityButton to select a memory location 0 through Choose one of the followingPress the Channel Up or Channel Down While recalling a stored memory locationFlash on the display To de-program a memory locationChannel Scan ThroughOr DCS can be scanned at a time Press the Mode button to proceed to set privacyPrivacy Code Scan If you press the Talk button while scanning, but more thanProgrammed Memory Locations Memory Location ScanYour microTALK radio can automatically scan up to To scan memory locationsVibrAlert and Call Alert To change call settingsPress the Channel Up or Channel Down button to To change keystroke tones Call Tone SettingsTo change a call tone setting Choose one of the followingFor Products Used in Canada Industry Canada Notice General Specifications FCC LicenseFor Products Used in the U.S.A FCC Licensing Required Normal Position Product Service Safety and TrademarkSafety Information for microTALK Radios Trademark Acknowledgement