Cobra Electronics CXR725C owner manual VibrAlert and Call Alert, To change call settings

Page 14

Operation

Mode Functions

 

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

During memory location scan (while receiving an Incoming transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on that

VibrAlert and Call Alert

•

Your microTALK radio can alert you to incoming signals by

 

sounding an audible call tone, by vibrating silently or both.

 

memory location.

b. Your radio will remain on that memory location and return to Standby mode. Press the Channel Up or Channel Down button to resume scanning memory locations.

c. After 10 seconds of inactivity, unit starts scan again.

If you press the Talk button while scanning, but more than

10 seconds after receiving a transmission, you will transmit on the memory location on which, during scanning, you last received a transmission.

If you do not press any button within 10 seconds, your radio will automatically resume scanning memory locations.

During memory location scan (while not receiving a transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on the channel/privacy code that was displayed before you entered mode functions or memory location on which, during scanning, you last received a transmission.

b. Press the Mode button to proceed to other functions.

c. Press the Lock/Enter button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the memory location on which, during scanning, you last received a transmission.

To reduce the number of memory locations being scanned, you may de-program any unwanted locations. (See page 16 to de-program a memory location.)

ModeButton

ChannelButton

To change call settings:

VibrAlert+Ring

1. Press the Mode button

 

until the Call Setting icon

 

flashes on the display.

 

The current setting (“01”

 

vibrate + ring, “02” vibrate

VibrAlertOnly

only or “03” ring only)

 

is displayed.

 

2. Press the Channel Up or

 

Channel Down button to

RingOnly

change the call setting.

3. Choose one of the following:

 

a. Press the Mode button

 

to enter the new setting

 

and proceed to other functions.

b. Press the Lock/Enter button to enter the new setting and return to Standby mode.

22

Nothing Comes Close to a Cobra® 23

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Making Life Easier and Safer Features Product FeaturesWarranty Limited One-Year Warranty on Radios & ChargerCaring for Your microTALK Radio Rechargeable Battery Pack and Desktop ChargerTo install or replace battery pack Estimated operation time on full charge 10 hoursUsing Your Radio Or Channel Down button Selectable HighLow Power OutputChannels Listening for a ResponseTo turn the lock feature on or off Lock FeatureSignal Strength Meter Auto Squelch/Maximum RangeWill be displayed in the following order Mode FunctionsScrolling through Mode Functions Privacy CodesSet Ctcss Privacy Codes To select a Ctcss privacy code Set DCS Privacy Codes To select a DCS privacy codeMemory Locations To turn VOX mode on or offVoice Activated Transmit VOX To set VOX sensitivityButton to select a memory location 0 through Choose one of the followingPress the Channel Up or Channel Down While recalling a stored memory locationFlash on the display To de-program a memory locationChannel Scan ThroughOr DCS can be scanned at a time Press the Mode button to proceed to set privacyPrivacy Code Scan If you press the Talk button while scanning, but more thanProgrammed Memory Locations Memory Location ScanYour microTALK radio can automatically scan up to To scan memory locationsPress the Channel Up or Channel Down button to To change call settingsVibrAlert and Call Alert To change keystroke tones Call Tone SettingsTo change a call tone setting Choose one of the followingFor Products Used in the U.S.A FCC Licensing Required General Specifications FCC LicenseFor Products Used in Canada Industry Canada Notice Normal Position Product Service Safety and TrademarkSafety Information for microTALK Radios Trademark Acknowledgement
Top Page Image Contents