Cobra Electronics CXR725C To de-program a memory location, Channel Scan, Flash on the display

Page 11

Operation

Mode Functions

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

ModeButton

To de-program a memory location:

1. Press the Mode button until the

Channel Scan

•

Your microTALK radio can automatically scan channels.

 

MemoryIcon

ChannelButton

Lock/EnterButton

Channel0

Memory icon and the memory location

flash on the display.

2. Press the Channel Up or Channel Down

button to select the memory location

(0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Lock/Enter button. The channel numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select Channel 0.

5.Choose one of the following:

a.Press the Lock/Enter button to enter the channel/privacy code in the selected memory location and return to the beginning of memory location options.

b.Press the Mode button to

enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/ privacy code displayed

before you entered mode functions.

ModeButton

ScanningChannels

ChannelButton

To scan channels:

1.Press the Mode button until the Scan icon and the channel numbers flash on the display.

2.Press the Channel Up or Channel Down button to begin scanning channels.

The radio ignores specific privacy codes while scanning channels.

The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds.

While setting channel scan, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel or channel/privacy code displayed before you entered mode functions.

While de-programming a memory location,

if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

16

Nothing Comes Close to a Cobra® 17

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Making Life Easier and Safer Limited One-Year Warranty on Radios & Charger Product FeaturesWarranty FeaturesEstimated operation time on full charge 10 hours Rechargeable Battery Pack and Desktop ChargerTo install or replace battery pack Caring for Your microTALK RadioUsing Your Radio Listening for a Response Selectable HighLow Power OutputChannels Or Channel Down buttonAuto Squelch/Maximum Range Lock FeatureSignal Strength Meter To turn the lock feature on or offPrivacy Codes Mode FunctionsScrolling through Mode Functions Will be displayed in the following orderSet DCS Privacy Codes To select a DCS privacy code Set Ctcss Privacy Codes To select a Ctcss privacy codeTo set VOX sensitivity To turn VOX mode on or offVoice Activated Transmit VOX Memory LocationsWhile recalling a stored memory location Choose one of the followingPress the Channel Up or Channel Down Button to select a memory location 0 throughThrough To de-program a memory locationChannel Scan Flash on the displayIf you press the Talk button while scanning, but more than Press the Mode button to proceed to set privacyPrivacy Code Scan Or DCS can be scanned at a timeTo scan memory locations Memory Location ScanYour microTALK radio can automatically scan up to Programmed Memory LocationsPress the Channel Up or Channel Down button to To change call settingsVibrAlert and Call Alert Choose one of the following Call Tone SettingsTo change a call tone setting To change keystroke tonesFor Products Used in the U.S.A FCC Licensing Required General Specifications FCC LicenseFor Products Used in Canada Industry Canada Notice Trademark Acknowledgement Product Service Safety and TrademarkSafety Information for microTALK Radios Normal Position
Top Page Image Contents