Cobra Electronics CXR725C Memory Location Scan, Your microTALK radio can automatically scan up to

Page 13

Operation

Mode Functions

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

During privacy code scan (while receiving an incoming transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on that channel/privacy code. Your radio will remain on that channel/privacy code and return to Standby mode.

b. Press the Channel Up or Channel Down button to resume scanning privacy codes.

If you press the Talk button while scanning, but more than 10 seconds after receiving a transmission, you will transmit

Memory Location Scan

•

Your microTALK radio can automatically scan up to

 

10 programmed Memory Locations.

 

If there are one or fewer memory locations

 

programmed in your radio, the scan memory

 

locations option will not be available. To program

 

at least two memory locations, see program

 

memory locations on page 13.

 

on the channel/privacy code on which you last received a transmission. This will then return the radio to Standby mode.

If you do not press any button within 10 seconds, your radio will automatically resume scanning privacy codes.

During privacy code scan (while not receiving a transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on the channel/privacy code that was displayed before you entered mode functions or the channel/privacy code on which, during scanning, you last received a transmission. This will return the radio to Standby mode.

b. Press the Mode button to proceed to set memory location scan (see page 21 for further details).

c. Press the Lock/Enter button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the channel/ privacy code on which, during scanning, you last received a transmission.

ModeButton

ScanningLocations

ChannelButton

To scan memory locations:

1.Press the Mode button until the Scan icon, Memory icon and the memory location number flash on the display.

2.Press the Channel Up or Channel Down button to begin scanning memory locations.

The Scan icon and the Memory icon will continue to be displayed when memory location scan is on. Your radio will continue to scan memory locations and stop if an incoming transmission is detected. Your radio will remain on that memory location for 10 seconds.

While setting memory location scan, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

20

Nothing Comes Close to a Cobra® 21

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Making Life Easier and Safer Warranty Product FeaturesFeatures Limited One-Year Warranty on Radios & ChargerTo install or replace battery pack Rechargeable Battery Pack and Desktop ChargerCaring for Your microTALK Radio Estimated operation time on full charge 10 hoursUsing Your Radio Channels Selectable HighLow Power OutputOr Channel Down button Listening for a ResponseSignal Strength Meter Lock FeatureTo turn the lock feature on or off Auto Squelch/Maximum RangeScrolling through Mode Functions Mode FunctionsWill be displayed in the following order Privacy CodesSet DCS Privacy Codes To select a DCS privacy code Set Ctcss Privacy Codes To select a Ctcss privacy codeVoice Activated Transmit VOX To turn VOX mode on or offMemory Locations To set VOX sensitivityPress the Channel Up or Channel Down Choose one of the followingButton to select a memory location 0 through While recalling a stored memory locationChannel Scan To de-program a memory locationFlash on the display ThroughPrivacy Code Scan Press the Mode button to proceed to set privacyOr DCS can be scanned at a time If you press the Talk button while scanning, but more thanYour microTALK radio can automatically scan up to Memory Location ScanProgrammed Memory Locations To scan memory locationsVibrAlert and Call Alert To change call settingsPress the Channel Up or Channel Down button to To change a call tone setting Call Tone SettingsTo change keystroke tones Choose one of the followingFor Products Used in Canada Industry Canada Notice General Specifications FCC LicenseFor Products Used in the U.S.A FCC Licensing Required Safety Information for microTALK Radios Product Service Safety and TrademarkNormal Position Trademark Acknowledgement
Top Page Image Contents