Operation | Mode Functions |
| |
|
| ||
Scrolling through Mode Functions | • | ||
By scrolling through the Mode Functions, you will be able to | |||
| |||
select or turn on/off preferred features of your microTALK radio. |
| ||
When scrolling through the Mode Functions, your radio features |
| ||
will be displayed in the following order: |
| ||
ModeButton | Set CTCSS Privacy Codes |
| |
| Set DCS Privacy Codes |
| |
| Set VOX On/Off |
| |
| Set VOX Sensitivity Level |
| |
| Set Memory Locations |
| |
| Set Channel Scan |
| |
| Set CTCSS Privacy Code Scan |
| |
| Set DCS Privacy Code Scan |
| |
| Set Memory Location Scan |
| |
| Set VibrAlert and/or Call Alert |
| |
| Set Call Alert Tone Signal |
| |
| Set Roger Beep On/Off |
| |
| Set Keystroke Tones On/Off |
|
Scroll through the mode functions using the Mode button. Each press and release of the Mode button will advance to the next mode function. Press the Talk button at any point to return the radio to Standby mode.
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
Privacy Codes | • |
|
Your microTALK radio incorporates two advanced coded squelch systems that can help to reduce interference from other users on any given channel. CTCSS (Continuous Tone Coded Squelch System) provides 38 privacy codes and DCS (Digitally Coded Squelch) provides 104 privacy codes. This provides a total of 142 Privacy Codes. Either system can be used on all channels, but both systems cannot be used on the same channel at the same time.
To successfully communicate using a privacy code, both the sending and receiving radios must be tuned to the same channel and to the same privacy code system (CTCSS or DCS) and privacy code number. Each channel will remember the last privacy code system and number you select.
The privacy code 00 is not a privacy code, but allows all signals to be heard on a channel that is set to 00 on both the CTCSS and DCS systems.
8 | Nothing Comes Close to a Cobra® 9 |