Cobra Electronics LI 720 owner manual To recall a stored memory channel location

Page 10

Operation

Mode Functions

6.Choose one of the following:

a.Press the Channel Up or Channel Down button to select a CTCSS privacy code (01 through 38) for the channel.

b.Press the Lock/Enter button to switch from CTCSS to DCS. The DCS icon and privacy code numbers will flash on the display. The Channel Up or Channel Down button can then be used to select a DCS privacy code (01 through 104) for the channel.

If “OFF” flashes in place of the privacy code numbers, a privacy code is already set in the opposite (CTCSS

or DCS) system. Press the Channel Up or Channel Down button to cancel the opposite code and select a privacy code from the active system for the selected channel.

7.Choose one of the following:

a.Press the Lock/Enter button to enter the channel/privacy code in the selected memory location. Radio then proceeds to next Memory location, which will blink.

b.Press the Mode button to

enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/ privacy code displayed

before you entered mode functions.

c.Press the Talk button to enter the channel/ privacy code in the selected memory location and exit mode functions. Upon release of the Talk button, the

radio will enter Standby mode on the channel/privacy code just entered.

Introduction

Mode Button

Memory Icon

Channel Buttons

Operation

Customer Assistance Warranty

To recall a stored memory channel location:

1. Press the Mode button until the Memory icon and the memory location number flash on the display.

2.Press the Channel Up or Channel Down button to select a memory location

(0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Talk button to return to Standby mode on the selected memory location.

A memory location can be reprogrammed at any time it is displayed and flashing. Press the Lock/Enter button to begin.

While recalling a stored memory location,

if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

14

15

Image 10
Contents Secure your microTALK Convenient and easy when using your microTALKStaying in touch with your family and friends is Radio while on the goFeatures Product FeaturesWarranty and Trademark Acknowledgement Trademark AcknowledgementCaring for Your microTALK Radio Avoid exposure to extreme temperaturesReplace battery compartment cover and belt clip Estimated operation time on full charge 12 hoursFor charging microTALK radios in desktop charger Using Your RadioAuto Battery Save Turning on Your microTALK RadioTo switch from high to medium to low power Time-out TimerAvailable call tone settings To Illuminate Display Channels With the radio on, select anyBars visible, the weaker the signal MicroTALK Range Lock FeatureSignal Strength Meter To turn the lock feature on or offSet Ctcss Privacy Codes Mode FunctionsScrolling through Mode Functions To select a Ctcss privacy codeSmall numbers flash on the display Set DCS Privacy CodesTo select a DCS privacy code To listen to All Hazards Radio channelsVoice Activated Transmit VOX To turn VOX mode on or offTo program a memory location Press the Mode button until Memory LocationsTo recall a stored memory channel location While recalling a stored memory locationThrough To de-program a memory locationChannel Scan To scan channelsTo scan privacy codes Press the Mode button to proceed to set privacyOr DCS can be scanned at a time Your microTALK radio can automatically scan the PrivacyProgrammed Memory Locations Memory Location ScanYour microTALK radio can automatically scan up to To scan memory locationsVibrAlert and Call Alert To change call settingsChannel Down button to To change keystroke tones Call Tone SettingsTo change a call tone setting Roger Beep Confirmation ToneSafety Information for microTALK Radios General Specifications FCC LicenseGeneral Specifications Normal PositionProduct Service For Products Purchased in the U.S.A