Cobra Electronics LI 720 To de-program a memory location, Channel Scan, Through, To scan channels

Page 11

Operation

Mode Functions

Introduction

Operation

Customer Assistance Warranty

Mode Button

To de-program a memory location:

1. Press the Mode button until the

Channel Scan

•

Your microTALK® radio can automatically scan channels.

 

Memory Icon

Channel Buttons

Lock/Enter Button

Channel 0

Memory icon and the memory location

flash on the display.

2. Press the Channel Up or Channel Down

button to select the memory location

(0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Lock/Enter button. The channel numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select Channel 0.

5.Choose one of the following:

a.Press the Lock/Enter button to enter the channel/privacy code in the selected memory location and return to the beginning of memory location options.

b.Press the Mode button to

enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/ privacy code displayed

before you entered mode functions.

While de-programming a memory location,

if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

Mode Button

Scanning Channels

Channel Buttons

To scan channels:

1.Press the Mode button until the Scan icon and the channel numbers flash on the display.

2.Press the Channel Up or Channel Down button to begin scanning channels.

The radio ignores specific privacy codes while scanning channels.

The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds.

While setting channel scan, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel or channel/privacy code displayed before you entered mode functions.

16

17

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Radio while on the go Convenient and easy when using your microTALKStaying in touch with your family and friends is Secure your microTALKTrademark Acknowledgement Product FeaturesWarranty and Trademark Acknowledgement FeaturesEstimated operation time on full charge 12 hours Avoid exposure to extreme temperaturesReplace battery compartment cover and belt clip Caring for Your microTALK RadioTurning on Your microTALK Radio Using Your RadioAuto Battery Save For charging microTALK radios in desktop chargerChannels With the radio on, select any Time-out TimerAvailable call tone settings To Illuminate Display To switch from high to medium to low powerTo turn the lock feature on or off Lock FeatureSignal Strength Meter Bars visible, the weaker the signal MicroTALK RangeTo select a Ctcss privacy code Mode FunctionsScrolling through Mode Functions Set Ctcss Privacy CodesTo listen to All Hazards Radio channels Set DCS Privacy CodesTo select a DCS privacy code Small numbers flash on the displayMemory Locations To turn VOX mode on or offTo program a memory location Press the Mode button until Voice Activated Transmit VOXWhile recalling a stored memory location To recall a stored memory channel locationTo scan channels To de-program a memory locationChannel Scan ThroughYour microTALK radio can automatically scan the Privacy Press the Mode button to proceed to set privacyOr DCS can be scanned at a time To scan privacy codesTo scan memory locations Memory Location ScanYour microTALK radio can automatically scan up to Programmed Memory LocationsChannel Down button to To change call settingsVibrAlert and Call Alert Roger Beep Confirmation Tone Call Tone SettingsTo change a call tone setting To change keystroke tonesNormal Position General Specifications FCC LicenseGeneral Specifications Safety Information for microTALK RadiosFor Products Purchased in the U.S.A Product Service
Top Page Image Contents