Cobra Electronics LI 720 Voice Activated Transmit VOX, Memory Locations, Flash on the display

Page 9

Operation

Mode Functions

Introduction

Operation

Customer Assistance Warranty

Voice Activated Transmit (VOX)

•

In VOX mode, your microTALK® radio can be used “hands-free,”

automatically transmitting when you speak. You can set the

 

VOX sensitivity level to fit the volume of your voice and avoid

 

transmissions triggered by background noise.

 

10 Memory Locations

•

Your microTALK® radio has 10 Memory Locations for storing

 

your most frequently used channels and channel/privacy code

 

combinations. These Memory Locations can be selected individually or can be scanned. (See page 21 for memory location scan.)

Mode Button

VOX Icon

To turn VOX mode on or off:

1.Press the Mode button until the VOX icon flashes on the display. The current on or off setting is displayed.

2.Press the Channel Up or Channel Down button to turn VOX on or off.

Mode Button

Memory Icon

To program a memory location:

1.

Press the Mode button until the

 

Memory icon and the memory location

 

flash on the display.

2.

Press the Channel Up or Channel Down

 

button to select the memory location

 

3. Choose one of the following:

 

a. Press the Mode button to enter the

 

selected on or off setting and proceed

Channel Buttons

to other functions.

 

b. Press the Lock/Enter button to enter

 

the selected on or off setting and return

 

to Standby mode.

Mode Button

To set VOX sensitivity:

1. Press the Mode button until the VOX icon

 

 

flashes and the current sensitivity level

 

is displayed.

 

The current sensitivity level is displayed

VOX Sensitivity Level

with letters “LE” and a Number 01

 

through 05, with Number 05 being the

 

most sensitive level and Number 01

 

being the least sensitive level.

Channel Buttons

2. Press the Channel Up or Channel Down

button to change the setting.

 

 

3. Choose one of the following:

 

a. Press the Mode button to enter

 

the selected setting and proceed to

 

other functions.

 

b. Press the Lock/Enter button to

 

enter the selected setting and return

 

to Standby mode.

Channel Buttons

Lock/Enter Button

(0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Lock/Enter button to enter

a new memory location or edit an already programmed memory location. The channel numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select a channel (1 through 22).

5.Press the Lock/Enter button.

The CTCSS icon and privacy code numbers will flash on the display.

12

13

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Staying in touch with your family and friends is Convenient and easy when using your microTALKSecure your microTALK Radio while on the goWarranty and Trademark Acknowledgement Product FeaturesFeatures Trademark AcknowledgementReplace battery compartment cover and belt clip Avoid exposure to extreme temperaturesCaring for Your microTALK Radio Estimated operation time on full charge 12 hoursAuto Battery Save Using Your RadioFor charging microTALK radios in desktop charger Turning on Your microTALK RadioAvailable call tone settings To Illuminate Display Time-out TimerTo switch from high to medium to low power Channels With the radio on, select anySignal Strength Meter Lock FeatureBars visible, the weaker the signal MicroTALK Range To turn the lock feature on or offScrolling through Mode Functions Mode FunctionsSet Ctcss Privacy Codes To select a Ctcss privacy codeTo select a DCS privacy code Set DCS Privacy CodesSmall numbers flash on the display To listen to All Hazards Radio channelsTo program a memory location Press the Mode button until To turn VOX mode on or offVoice Activated Transmit VOX Memory LocationsWhile recalling a stored memory location To recall a stored memory channel locationChannel Scan To de-program a memory locationThrough To scan channelsOr DCS can be scanned at a time Press the Mode button to proceed to set privacyTo scan privacy codes Your microTALK radio can automatically scan the PrivacyYour microTALK radio can automatically scan up to Memory Location ScanProgrammed Memory Locations To scan memory locationsTo change call settings VibrAlert and Call AlertChannel Down button to To change a call tone setting Call Tone SettingsTo change keystroke tones Roger Beep Confirmation ToneGeneral Specifications General Specifications FCC LicenseSafety Information for microTALK Radios Normal PositionFor Products Purchased in the U.S.A Product Service
Top Page Image Contents