Panasonic AJ-SD955BE, AJ-SD930BE manual System menu

CONTENTS

Setup menus

SYSTEM menu

No./Item			Description
00	This selects the signal to output from the
	VIDEO OUT 2 connector.
WFM SEL
	0000	CTL : The CTL signal is output.
	0001	TC : The		TIME	CODE	signal	is
			output.
	0002	VIDEO : The		VIDEO OUT		signal	is
			output.
	0003	RF_L : The PB L RF signal is output.
	0004	RF_R : The PB R RF signal is output.
	0005	ENV_L : The PB L ENV signal is output.
	0006	ENV_R : The PB R ENV signal is output.
	<Notes>
	OThe settings can be changed at any time
	regardless of the setup menu item No. 30
	(MENU LOCK) setting.
	ODuring normal playback, the output signals
	have levels which are virtually identical to the
	values given below under a 75Ω termination.
	CTL: 0.1 to 0.3 Vp-p				TC: 0.6 Vp-p
	VIDEO: 1.0 Vp-p
10	This selects whether the video output signal
	is to be adjusted with the VTR or with the
ENCODER	external encoder remote control.
SEL
	0000 REMOTE :
	Video output signals are adjusted with the
	external encoder remote control.
	0001	LOCAL :
	Video output signals are adjusted with the
	VTR.
11	Coarse adjustment of system phase: 90° units
SYS SC	0000	0	<Note>
COAR.	0001	90	If setting operation is
	0002	180	performed, the setting value
	0003	270	does not return to factory
			(default) setting.
12	Fine adjustment of system phase:
	Variable range ±45° or more
SYS SC FINE	–: Advanced, +: Delayed
	0000	–128	<Note>
	:	:	If setting operation is
	0128	0	performed, the setting value
	:	:	does not return to factory
	0255	127	(default) setting.
13	System phase adjustment: 74 ns steps
	–: Advanced, +: Delayed
SYS H
	0000	–128	<Note>
	:	:	If setting operation is
	0108	0	performed, the setting value
	:	:	does not return to factory
	0216	127	(default) setting.

No./Item		Description
14	SCH phase adjustment: 90° units
	(The SC phase changes but the H phase does
SCH COARSE	not change.)
	–: Advanced, +: Delayed
	0000	0
	0001	90
	0002	180
	0003	270
15	SCH phase adjustment:
	Total variable range: ±45° or more
SCH FINE	(The SC phase changes but the H phase does
	not change.)
	–: Advanced, +: Delayed
	0000	–32
	:	:
	0032	0
	:	:
	0064	32
16	This adjusts the audio output phase with
	respect to the video output: 20.8 µs steps
AV PHASE	–: The	audio output phase is advanced with
	respect to the video output.
	+: The audio output phase is delayed with respect
	to the video output.
	0000	–128
	:	:
	0128	0
	:	:
	0255	127

The underlined items indicates the initial setting.

33 (E)