CONTENTS
Features
Light and compact
This unit is a 4U size digital VTR and can be easily mounted in a
Up to 92 minutes of recording
Mcassettes (max. 33 minutes: using the
Superior picture quality
Superior picture quality is achieved through 4:2:2 component signal recording at 2 times the recording rate of the existing DVCPRO (25 Mbps) format.
Switching between 525i and 625i TV systems
SD955B
By selecting the setting (setup menu item No. 070) that matches the video input signal TV system (525i or 625i), the signals of each TV system can be recorded and/or played back.
SDI interface
A 4:2:2 serial digital interface is a standard feature.
Compatibility with DVCPRO (25 Mbps) format
This unit can record, play back and edit material in the existing DVCPRO (25 Mbps) format.
Compatibility with general consumer video equipment
DV cassette tapes containing material shot with a consumer digital camera or the like can be played back on this unit. A cassette adapter
Digital slow motion/jog dial
Panasonic’s original digital
Dial shuttle
Colour images can be played back in forward and reverse directions up to a maximum of a32 normal playback speed.
Recording and playback of UMID information
Recording and playback of UMID (Unique Material Identifier) information complies with the SMPTE 330M standard.
UMID information can be checked on the DIAG menu.
UMID information cannot be played back correctly by VTRs that do not support the recording and playback of UMID information. In addition, even if a VTR that does not support the recording and playback of UMID information is connected to this unit and recording performed, UMID information will not be recorded correctly.
Time codes
This unit has a
In addition to the internal time code, external time code input or input signal VITC can be recorded on this VTR as the time code.
Multifunctional interface
O Serial digital input/output
A component serial interface is provided as standard and enables interfacing of the serial digital component signals.
O Analogue video input/output
Both composite and component signal outputs are provided as standard.
Use of an analogue video input board
Use the
O AES/EBU audio input/output
Digital audio input/output connectors are provided.
O IEEE1394 digital input/output
Use of an digital video interface board (AJ- YAD955G, optional accessory) enables input/output interfacing of the digital signals with the IEEE1394 standard.
O SDTI input/output
Use of an SDTI board
O 9-pin RS-422A/RS-232C remote
In addition to the standard
The
O
O
The setup settings, which are conducted prior to operating the unit, are performed while viewing the setup menus on the unit’s display or a TV monitor.
5 (E)