Panasonic AJ-SD955BE, AJ-SD930BE manual User menu, Basic

CONTENTS

Setup menus

USER menu		<BASIC>
No./Item			Description
000	This sets the preroll time.
	The preroll time can be set from 0 to 15 seconds
P-ROLL TIME	in 1-second increments.
	0000	0s	<Note>
	:	:	When the		automatic	editing
	0005	5s mode [PREVIEW, AUTO EDIT]
	:	: is set, the unit will not operate if
	0015	15s the		preroll time is set to 0
			seconds.
001	This selects the buttons which can be operated
	on the front panel when the CONTROL switch
LOCAL ENA	has been set to REMOTE.
	0000	DIS :
	No buttons can be operated.
	0001	ST&EJ :
	Only the STOP and EJECT buttons can be
	operated.
	0002	ENA :
	AJ-SD955B: All			buttons	except	for the
		RECORDER			and PLAYER
		buttons can be operated.
	AJ-SD930B: All buttons can be operated.
002	This selects the 12 or 24 hour display for the
	CTL counter.
TAPE TIMER
	0000	±12h : 12 hour display
	0001	24h : 24 hour display
003	This selects whether the remaining tape time
	and total tape length are to be displayed in the
REMAIN SEL	superimposed display of the VIDEO OUT 3/
	SDI OUT 3 connector signals.
	0000	OFF : No display.
	0001	2L :
	The remaining tape time is displayed on the
	second line.
	0002	1L :
	The remaining tape time is displayed on the
	first line.
	0003	R/TTL :
	The remaining tape time is displayed on the
	first line, and the total tape length is displayed
	in the second line.
	<Notes>
	OWhen “2L” is selected, the remaining tape time
	is not displayed if “TIME” has been selected as
	the setup menu item No.008 (DISPLAY SEL)
	setting.
	OWhen “R/TTL” is selected, the total tape length
	is not displayed if “TIME” has been selected as
	the setup menu item No.008 (DISPLAY SEL)
	setting.

No./Item			Description
006		This selects whether or not to synchronize
	SD955B
		between two VTRs.
SYNCHRONIZE
		0000	OFF :
		No synchronization. The editing points deviate
		several frames, but editing can be started
		quickly.
		0001	ON :
		Synchronization. Allows for error-free editing.

008This selects what information is to be provided by the time code and other super

DISPLAY SEL displays output to the VIDEO OUT 3/SDI OUT 3 connector.

0000 TIME : Data only.

(The data indicates the value for whichever of CTL, TC or UB currently selected by the COUNTER button.)

0001 T&STA : Data and operation status.

0002 T&S&M : Data, operation status and mode.

0003 T&RT : Data and REC TIME

0004 T&YMD :

Data and REC DATE (year/month/day)

0005 T&MDY :

Data and REC DATE (month/day/year)

0006 T&DMY :

Data and REC DATE (day/month/year)

0007 T&UB :

Data and user’s bit.

However, when UB has been selected with the COUNTER button, the time code is displayed after the user’s bit.

0008 T&CTL :

Data and CTL data.

However, when CTL has been selected with the COUNTER button, the time code is displayed after the CTL data.

0009 T&T :

Data and time code.

0010 VITC:

The time code and user’s bit recorded in the

VAUX area are displayed.

<Notes>

OMode display:

DVCPRO 50 (50 Mbps) = DVCPRO_50, DVCPRO (25 Mbps) = DVCPRO,

DV = DV, DVCAM = DVCAM

OAn error message appears if a warning or error has occurred when “T&S&M” has been selected as this setting.

OREC TIME and REC DATE are displayed during DV/DVCAM, playback only. With the DVCPRO50 (50 Mbps) or DVCPRO (25 Mbps) format, the operating mode is displayed.

The underlined items indicates the initial setting.

35 (E)