Panasonic AJ-SD930BE, AJ-SD955BE manual Cc Rec, Wide Select, Umid REC

CONTENTS

Setup menus

USER menu			<VIDEO>
No./Item			Description
623	SD955B	For setting 7.5% setup processing to be
		performed on input and output signals in the
SETUP 50		DVCPRO50 (50 Mbps) mode.
		When the STOP button is pressed, operation is
		transferred to the sub-screen, and the setup level
		is set for each output. To return from the sub-
		screen, press the STOP button again.
		<Note>
		This setup menu is not displayed in the 625i
		system.
Sub-screen
00		This selects the 7.5% setup processing for
CMPST IN		the input composite signal.
		0000	THRU :
		The signal is recorded in its original form.
		0001	CUT :
		The signal is recorded with the 7.5% setup
		removed.
01		This selects the 7.5% setup processing for
CMPST OUT		the output composite signal.
		0000	THRU :
		The signal is output in its original form.
		0001	ADD :
		The signal is output with the 7.5% setup
		added.
		<Note>
		Bear in mind the setting for sub-screen item No.
		03 (CMPNT OUT) of setup menu item No. 623
		(SETUP 50).
02		This selects the 7.5% setup processing for
CMPNT IN		the input component signal.
		0000	THRU :
		The signal is recorded in its original form.
		0001	CUT :
		The signal is recorded with the 7.5% setup
		removed.
03		This selects the 7.5% setup processing for
CMPNT OUT		the output composite, component and serial
		(digital) signal.
		0000	THRU :
		The signal is output in its original form.
		0001	CUT :
		The signal is output with the 7.5% setup
		removed.
		0002	ADD :
		The signal is output with the 7.5% setup
		added.

No./Item			Description
624	SD955B	For selecting whether to record the closed
		caption signals multiplexed on the input
CC REC		signals on the tape.
		0000	OFF :
		No closed caption signal is recorded.
		In addition, the EE output signals are blanked.
		0001	ON :
		When a closed caption signal is detected from
		the selected input signal, it can be recorded.
		<Notes>
		OIf SDTI/1394 signals have been selected as
		the input signals, the closed caption signals
		which have been multiplexed onto the input
		signals will be recorded on the tape regardless
		of the setting.
		OThis setup menu is not displayed in the 625i
		system.
645		This selects whether or not to record the
		wide-screen information on the tape.
WIDE SELECT
		0001	WIDE :
		The wide-screen information is not recorded on
		the tape.
		0002 NORMAL :
		The wide-screen information is recorded on the
		tape.
		<Note>
		If SDTI/1394 has been selected as the input
		signals using the INPUT SELECT button, the
		wide-screen information on the input signals will
		be recorded regardless of this menu’s setting.
660		This selects whether or not to record the
		UMID information on the tape.
UMID REC
		0000	OFF :
		UMID information is not recorded on the tape.
		In addition, EE output signals are blanked.
		0001	ON :
		UMID information is recorded on the tape.
		<Notes>
		OIf SDTI/1394 has been selected as the input
		signals using the INPUT SELECT button, the
		UMID information on the input signals will be
		recorded regardless of this menu’s setting.
		OIf THRU has been selected as the setup menu
		item No. 106 (EE MODE SEL) setting, UMID
		information of the EE output signals will be
		blanked.

The underlined items indicates the initial setting.

48 (E)