Panasonic AJ-SD930BE manual Offset, Sys Sc/H, Local, Video Level, Black Level, SET UP Level, Hue

CONTENTS

Setup menus

SYSTEM menu

No./Item			Description
18	System phase adjustment.
SYS H	0000	–3 :–13.4 µsec
OFFSET	0001	–2 :–8.96 µsec
	0002	–1 :–4.52 µsec
	0003	0	: 0 sec
	0004	1	: +4.52 µsec
	0005	2	: +8.96 µsec
	0006	3	: +13.4 µsec
	<Note>
	Factory settings will remain unchanged even if an
	attempt is
19	This sets whether the system phase is to be
	adjusted by the unit or from the external
SYS SC/H	encoder remote controller.
	0000	REMOTE :
	The system phase is adjusted from the
	external encoder remote controller.
	0001	LOCAL :
	The system phase is adjusted by the unit.
	<Note>
	This setting does not take effect when LOCAL
	has been selected as the SYSTEM menu item
	No. 10 (ENCODER SEL) setting.
22	This sets the video level.
	Max. variable range: ±3 dB
VIDEO LEVEL
	0000	–128
	:	:
	0128	0
	:	:
	0255	127

The underlined items indicates the initial setting.

	No./Item		Description
23		This sets the black level.
		Max. variable range: 14 IRE
	[625i system]
	BLACK LEVEL	0000	–128
		:	:
	[525i system]	0128	0
	SET UP LEVEL	:	:
		0255	127
	SD955B
24		This sets the chroma phase.
		Max. variable range: ±30°
	[625i system]
	CHROMA PHASE	0000	–128
		:	:
	[525i system]	0128	0
	HUE	:	:
		0255	127
	SD955B
25		This sets the chroma level.
		Max. variable range: ±3 dB
	CHROMA
	LEVEL	0000	–128
		:	:
		0128	0
		:	:
		0255	127
30		This selects whether the system file lock
		mode is to be engaged or released.
	MENU LOCK
		0000	OFF : The lock is released (file data
			can be changed).
		0001	ON : The lock is engaged (file data
			cannot be changed).
		<Note>
		Setup menu No. 00 (WFM SEL) can be changed
		at any time regardless of the setting selected for
		this menu item.

Video output signal adjustments

The video output signal adjustments are made by selecting the SYSTEM menu item No. 10 (ENCODER SEL) and No. 19 (SYS SC/H) settings.

These adjustments can be used for analogue component, analogue composite and SDI signal output. A control matrix of the adjustments is shown below.

Setting			Item adjusted
SYSTEM menu item	SYSTEM menu item	SYSTEM menu item		SYSTEM menu item
10: ENCODER SEL	19: SYS SC/H	11: SYS SC COAR.		22: VIDEO LEVEL
		12: SYS SC FINE		23: BLACK LEVEL/SET UP LEVEL
		13: SYS H		24: CHROMA PHASE/HUE
				25: CHROMA LEVEL
LOCAL	LOCAL	Unit		Unit
	REMOTE
	LOCAL	Unit
REMOTE				External encoder remote controller
	REMOTE	External encoder	remote
		controller

34 (E)