Uniden BT229 Using Your Headset, Connect to your phone Once the headset is paired, Headset on

Page 6

Connect to your phone

Most phones connect to the headset as soon as you pair it; if yours won’t, turn the headset off and back on. If headset still won’t connect, check your phone’s owner’s manual for additional Bluetooth information.

Once the headset is paired:

►Whenever you turn the headset on, it will automatically try to connect to whatever device it was connected to last.

►If the headset loses the connection (e.g., if your phone is out of range), it should reconnect automatically. To manually reconnect, press MFB.

Using Your Headset

Turning the

To turn the headset on, press and hold MFB until the blue LED flashes and

headset on

you hear the turn-on melody (about 4 seconds).

 

 

Turning the

Press and hold MFB until the red LED flashes and you hear the turn-off

headset off

melody (about 4 seconds).

Page 5 Page 7
Image 6
Page 5 Page 7
Contents BT229 Bluetooth Headset User’s Guide Or call our Customer Service line atGetting to Know the Headset What the LED colors meanState Meaning What the buttons do Setting Up Your Headset Charge the batteryPair the headset to your Bluetooth phone Not paired. Try the pairing procedure again Headset on Using Your HeadsetConnect to your phone Once the headset is paired Headset offWrap the earhook behind your ear Place the hook behind your earAvailable Features End a call Press MFB Reject anAll voice commands must already be programmed Call WaitingVoice-activated dialing Using the Multipoint Function Pairing to more than one phoneUsing both phones Troubleshooting and Maintenance TryGeneral Information Cleaning the headset Safety and Handling InformationFCC Notice Two-Year Limited Warranty
Top Page Image Contents