Uniden BT229 Call Waiting, Voice-activated dialing, All voice commands must already be programmed

Page 9

Call Waiting

To use this feature, you must subscribe to Call Waiting through your service provider, and your phone must support the hands-free profile.

To put your current call on hold and switch to a waiting call, press and hold Up until you hear 3 beeps (about 4 seconds). When you release the button, you’ll be connected to the waiting call. (Press and hold Up again to switch back to the original call.)

To hang up your current call and switch to a waiting call: press and hold Down for about 4 seconds. Wait until you hear 3 beeps, then release the button.

Voice-activated dialing

To use this feature, your phone must support voice dialing, and

all voice commands must already be programmed.

To activate voice dialing, make sure your phone is in standby. Then, press and hold MFB until you hear a beep (about 2 seconds).

Use your pre-programmed voice commands as you would with your phone. (For best results, try recording your voice tags through your headset. )

Image 9
Contents Or call our Customer Service line at BT229 Bluetooth Headset User’s GuideGetting to Know the Headset What the LED colors meanState Meaning What the buttons do Setting Up Your Headset Charge the batteryPair the headset to your Bluetooth phone Not paired. Try the pairing procedure again Connect to your phone Once the headset is paired Using Your HeadsetHeadset on Headset offPlace the hook behind your ear Wrap the earhook behind your earEnd a call Press MFB Reject an Available FeaturesAll voice commands must already be programmed Call WaitingVoice-activated dialing Using the Multipoint Function Pairing to more than one phoneUsing both phones Try Troubleshooting and MaintenanceGeneral Information Safety and Handling Information Cleaning the headsetFCC Notice Two-Year Limited Warranty