Distinctive Ringer Setup
Distinctive Ringer allows you to assign a designated ring tone to a stored phonebook number. When a call is received and the Caller ID information matches the information in one of the phonebook memory entries, the phone uses the distinctive ring assigned to that particular caller. You can assign distinctive rings to multiple phonebook memory entries. Switching the setting to Distinctive Off disables distinctive ringing: all incoming calls will have a normal ring tone. Switching to Distinctive On activates all programmed distinctive rings.
1) Press menu/clear (or the MENU soft key on the base). Select the Handset Setup or Base Setup menu, and then the Distinctive Ring submenu.
2) Press 
/volume up/down to select On or Off.
3)Press select/
/audio tone (or the OK soft key on the base). You will hear a confirmation tone.
Setting AutoTalk (Handset only)
AutoTalk allows you to answer the phone simply by removing the handset from the cradle. You do not have to press any buttons to answer the call.
G E T T I N G S T A R T E D
1)Press menu/clear. Select the Handset Setup menu, and then the AutoTalk submenu.
2)Press 
/vol/∧ or 
/vol/∨ to select On or Off.
3)Press select/
/audio tone. You will hear a confirmation tone.
#WVQ6CNM
1P 1HH
w w w . u n i d e n . c o m | G E T T I N G S T A R T E D [ 2 2 ] |