Speed Dialing
You can program up to ten speed dial numbers in each handset and the base. You must program a speed dial number before you can use the speed dialing feature. When the phone is in standby mode, press and hold a number key 
, or pick up the corded handset. The number stored in that speed dial location (SPD1 - SPD0) is then dialed.
Editing or Erasing a Stored Name, Phone Number, Distinctive Ring and Speed Dial
1)When the phone is in standby mode, press 
.
To delete all phonebook locations, press 
/volume up/down to select Delete All, and press select/ 
/ audio tone (or the OK soft key). Delete All?
appears. Use 
/volume up/down to select Yes, and then press select/ 
/audio tone (or the OK soft key). You will hear a confirmation tone.
2)Press 
/volume up/down to select Dial/Edit, and then press select/
/audio tone (or the OK soft key).
3)Use 
/volume up/down or the number keypad to select desired phonebook entry (see "Viewing the Phonebook" on page 45).
4)When you have found the desired phonebook entry, press select/
/audio tone (or the EDIT soft key) to edit the entry.
[ 4 7 ] P H O N E B O O K | w w w . u n i d e n . c o m |