Cooper Lighting IMI-687 installation instructions Sheet 3, Nema Photocontrol Replacement

Page 3

INSTALLATION INSTRUCTIONS

IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.

Talon Medium

Sheet 3 of 3

11/29/07IMI-687

WARNING: Risk of Fire/Electric Shock. If not qualified, consult an electrician.

WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.

WARNING: Risk of Burn. Disconnect power and allow fixture to cool before changing bulb or handling fixture.

WARNING: Risk of Personal Injury. Fixture may become damaged and/or unstable if not installed properly. Tighten all fixture components to their recommended torque values.

WARNING: Risk of Fire/Electrical Shock. Upside down installation can result in overheating or accumulation of water in fixture. Install right side up.

NEMA PHOTOCONTROL REPLACEMENT

1.The photocontrol is mounted on top the housing. FIG. 6

2.Remove the photocontrol by twisting counterclockwise and replace.

OPTIC DISTRIBUTION AND ORIENTATION

The Talon Medium fixture is offered with some optics that have directional distributions. For aiming purposes, the Talon Medium was designed with the flexibility to allow each of its optics to be rotated to any of four positions, located at 90° increments. To change the optic orientation, open the door and remove the lamp. Use a screwdriver to remove the four screws as shown in FIG. 7. Reposition the optic, insert the screws and tighten securely.

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to

provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user's purpose, please contact your nearest representative.

NEMATwistlock

Photocontrol

FIG. 6

FIG. 7

Remove Optic, Rotate

To Desired Position

and Fasten Into Place

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.

NOTE: Specifications and dimensions subject to change without notice.

Visit our web site at www.cooperlighting.com

Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 ADH071363

Image 3
Contents Sheet 1 Installation InstructionsFixture Maintenance Relamping PLUG-IN Starter ReplacementSheet 2 Nema Photocontrol Replacement Sheet 3Optic Distribution and Orientation