Uniden D1880 manual Important Information, Solving Problems, Programming a Security Code

Programming a Security Code

With the phone in standby, open the menu; select Ans. Setup, then select Security Code. Use the number keypad to enter a two-digit security code (01 to 99). Press Menu/select when you’re finished.

##Remember to make a note of your new security code! Dialing In to Your System

1.Call your phone number & wait until the system answers. (If the system is turned off, it answers after 10 rings & sounds a series of beeps.)

2.During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby.

3.The system announces the time, the number

of messages in memory, and a help prompt. It beeps to let you know it's waiting for a command.

4.When you hear beeping, enter a 2-digit command from the chart.

01	Repeat message	05	Stop playback
02	Play message	06	Turn the system on
03	Skip message	09	Turn the system off
04	Delete message	10	Hear help prompts

##If you don't press any keys for 15 seconds, the system hangs up and return to standby.

Important Information

Solving Problems

If you have any trouble with your phone, check this section first. If you need help, call our Customer Care Line listed on the front cover.

General problems	Possible solutions
No handsets can	xxCheck the telephone cord connection.
	xxDisconnect the base AC adapter for a few
make or receive calls.
	minutes; then reconnect it.

English - 17