Uniden DS71 manual Retainer holds the handset in place, Direct wall mounting

Page 13

Before you plug the other end of the telephone cord into the modular jack on the wall, charge the battery (See

CHARGING THE BATTERY PACK, page 15).

6. Align the mounting slots on the

base with the mounting posts on the wall. Push in and down until the phone is firmly seated.

7.On the base, pull the handset retainer out of the slot. Rotate clockwise 180°.

8.Flip the retainer from front to back. Slide it back into the slot so that the lip

of the retainer is up (arrow on the retainer clip must be pointing down).

The retainer holds the handset in place.

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting the screws into the wall.

Mount your phone near a working phone jack to avoid excessive cord lengths

Make sure the wall material is capable of supporting the weight of the base and the handset.

INSTALLATION & ADJUSTING

11

Image 13
Contents DS71 Page Contents Precaution PrecautionsThis equipment contains a rechargeable Ni-MH battery Do not short-circuit the batteryImportant Safety Instructions Important Electrical Considerations Additional Battery Safety PrecautionsTelephone Line Problems Introduction FeaturesWelcome Registration Card Included in Your PackageInstallation Considerations InstallingSet the base on a desk or tabletop with DESK/TABLETOP InstallationKeypad facing up or down then place Standard wall plate mounting Wall InstallationPlug the AC adaptor into a standard 240V AC wall outlet Direct wall mounting Retainer holds the handset in placeBe careful not to insert the mounting screws Installation & Adjusting Slide the battery cover forward Until it snaps into place Installing the Handset Battery PackInitial battery charging Charging the Battery PackLow battery indicator Cleaning the Battery ContactsAdjusting Ringer Tone Adjusting the Volume ControlsHandset ringer volume Handset earpiece volumeTo attach the beltclip Installing the BeltclipTo remove the beltclip Pull back on the release tab and lift the beltclip upTo reset the digital security code Headset InstallationDigital security code is reset Automatic Digital Code SecurityMaking and Receiving Calls UsingBasic phone operation For Australian Version Call WaitingTalk to the second caller For New Zealand VersionMute Using the memory location featuresDialing a Number in Memory Press mem . The talk LED blinksTravelling OUT-OF-RANGE Chain DialingPabx Connection Quick Reference Chart TroubleshootingNo power on General SpecificationsBase Unit HandsetWarranty WarrantyControls & Functions 2129 Thank YOU for Purchasing a Uniden Phone