Uniden DECT1588 Series manual Using Multiple Bases, Registering the handset to another base

Page 14

Installing the Phone

Using Multiple Bases

The handsets supplied with your phone can be registered to a total of four different bases. Compatible bases include the DECT1500 series and the WXI2077 series. (See our website or contact Customer Service for an up-to-date list of compatible models.)

Note: To confirm how many bases the handset is registered to, open the Select Base submenu (follow the step 1 of Selecting the base on page 15). Press END to close the list and return to standby.

Registering the handset to another base

To register a handset to another base:

1)Make sure the handset battery is fully charged. ) If the other base has an LCD display:

•With the phone in standby, press MENU/SELECT on the base. Move the cursor to select the Register Handset menu, and then press MENU/SELECT. Handset Registering will appear.

If the other base does not have an LCD display:

•Disconnect the base AC adapter. Then press and hold the Find Handset key* while you reconnect the adapter. Keep holding the Find Handset key until the charge LED starts to blink..

*This key might be labeled Find or Find HS.

3)On the handset, press MENU/SELECT. Select the Register Base menu. Handset Registering will appear in the display. (After step 2, you have thirty seconds to complete this step 3 before the system returns to standby.)

4)Wait approximately thirty seconds. Registration complete will be displayed to indicate the handset has been registered to the base and a handset ID will be automatically assigned. The handset assigns its own ID to this base, too. (Since the base ID is based on the order in which the handset was registered to the different bases, a base may have different IDs on each handset.)

If Registration failed appears in the LCD, please try these steps again.

Note: The handset will stay connected to the new base until you select a different base (see below).

14

Image 14

Contents DECT1588 Series Table of Contents Adjusting the Ringer, Earpiece Speaker Volume Using Your PhoneUsing Caller ID, Call Waiting, and Redial Lists Finding a Lost Handset Using Hold, Conference and TransferTroubleshooting Using the Answering SystemMaintenance PrecautionsAccessibility WelcomeInstalling the Phone Choosing the Best LocationInstalling the Battery RED BlackCharging the Handset Connecting the Base Connecting to the Phone Line InstallingTesting the Connection Changing the dial mode Press MENU/SELECTExpanding Your Phone Adding accessory handsetsRegistering accessory handsets Using Multiple Bases Registering the handset to another baseSelecting the base Getting to Know Your New Phone FeaturesAnswering system features Terminology Used in this Manual Manual ConventionsParts of the Handset New message LEDParts of the Base Answer ON/OFF keyUsing the Interface Reading the DisplayUsing the Four-way Function Key Using the MenusEntering Text from Your Phone Selecting a Language Basic SetupSetting the Day & Time For Canadian models Choose English or Français FrenchActivating Personal Ring Handset only Activating the Key Touch ToneEnter the name for this entry Edit Name Setting Up the PhonebookCreating Phonebook Entries Enter the number for this entry Edit NumberFinding a Phonebook Entry Editing an Existing Phonebook EntryStoring Caller ID or Redial Numbers in the Phonebook Deleting a Single Phonebook EntryDeleting all Phonebook Entries Copying Phonebook Entries to Another StationSelecting a Ring Tone Customizing Your HandsetsChanging the Handset Banner Activating AutoTalk Using Your PhoneDuring a Power Failure Activating Any Key AnswerCall Making and Receiving CallsMaking AnsweringChain dialing from the phonebook Switching to the Speakerphone During a CallMaking a Call from the Phonebook Making a Call from a Caller ID Record Using Caller ID, Call Waiting, and Redial ListsUsing the Caller ID List Deleting Caller ID Numbers Seven-digit dialingDeleting a Redial Record Using Call WaitingRedialing a Number Adjusting the Earpiece Volume Adjusting the Ringer, Earpiece and Speaker VolumeAdjusting the Ringer Volume Adjusting the Speaker VolumeAdjusting the Audio Tone Activating T-Coil ModePlacing a Call on Hold Using Hold, Conference and TransferFinding a Lost Handset ConferencingTransferring a Call Answering a transferred callUsing the Intercom Using Special FeaturesPrivacy Mode Making an intercomAnswering an intercom Tone Dialing Switch OverMuting the Microphone Using a Voice Mail Service Resetting the voice message waiting indicatorSelecting a Greeting Setting Up the Answering SystemRecording a Personal Greeting Deleting Your Personal Greeting Setting the Number of RingsSelecting the Language for Announcements Activating the Base Call Screen Setting the Record Time or Announce onlyActivating the Message Alert From the base From the handset Using the Answering SystemTurning Your Answering System On and Off Command Use it to Remote Operation from the HandsetReviewing Messages Operating the Answering System While You Are Away from Home Screening CallsTurning Off the Message Alert Tone Dialing in to your answering systemIf you want to Press Wall Mounting the Base WallWall Mounting the Base Wall plateBattery Information MaintenanceSpecifications Battery lifeCleaning the charging contacts Power FailuresLow battery alert Battery replacement and handlingWhen you have this Try Problem TroubleshootingCommon Issues Unavailable Speaker during call screening Weak or Hard to Hear Audio Noise or Static on the LineResetting the Handset Installing a telephone line filter or DSL filterResetting the Handset Without the Base Changing the Line Mode for Multiple Extensions Traveling Out of RangeLiquid Damage Handset BasePrecautions Rechargeable Nickel-Cadmium Battery WarningImportant Safety Instructions FCC Wants You To KnowPrecautions Terminal equipment Radio interferenceCordless telephone privacy Radio equipmentIndex HandsetPIN Remote access away from home Remote Operation CardTaskKey One Year Limited Warranty Visit OUR Website AT