Finding a Lost Handset Hold, Conference and Transfer
Finding a Lost Handset
To locate a misplaced handset, press FIND/HOLD/INT’COM on the base when the phone is in standby. Use 
or 
to select the handset you want to page, and then press Menu/Select. Select All to page all registered handsets. To cancel paging, press FIND/HOLD/INT’COM on the base again.
Note: Handsets that are not currently connected to this base will not be paged.
Using Hold, Conference and Transfer
Placing a Call on Hold
1)During a call, press Clear/Int’com on the handset or FIND/HOLD/INT’COM on the base to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read, Line On Hold.
) To return to the party on hold, press TALK/Flash or 
on the handset or pick up the corded handset from the
base or press 
on the base. The phone will return to the holding party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be disconnected and the phone will return to standby.
• While a call is on hold, Call Waiting and CID on Call Waiting do not work.
Using
Conferencing
If you have more than one handset, up to four people can participate in a conference call. A
1)Press TALK/Flash or 
on the handset or pick up the corded
handset from the base or press 
on the base to join the call.
) To hang up, return the handset to the cradle or press END on the
handset or return the corded handset to the base or press 
on the base. The other party will still be connected to the call.
| Outside call |
Handset #2 |
|
| Base |
Handset #1 | speakerphone |
or corded handset |
38