Wall Mounting the Base
On the base unit, pull the handset retainer out of the slot.
Rotate it clockwise 180 degrees and flip the retainer from front to back. Slide it back into the slot.
The retainer holds the corded handset in place.
Place the mounting slots over the
pins on the wall plate.
Wall plate
Slide the base down to lock it into place.
(To AC outlet)
Notes: Mounting the phone directly on the wall
•Be sure the wall is capable of supporting the weight of the phone, and use the proper type of anchoring device for the wall material.
•Insert two #10 screws (minimum length of 1 3/8 inches, not supplied) into the wall, 3 15/16 inches apart.
•Leave the screw heads 1/8 inch away from the wall to allow room for mounting the phone.
•Align the mounting slots over the screws and slide the base down into place as shown above.
52