Uniden DX8200 manual Troubleshooting, Problem Suggestion

Page 49

TROUBLESHOOTING

If your DX8200 Cordless Telephone is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service for assistance.

Problem

Suggestion

 

 

Charge light won’t come on when

• Make sure the AC Adapter is plugged into the

Handset is placed in Base Unit.

Base Unit and wall outlet. Wall outlet must be

 

switched on.

 

• Make sure Handset is properly seated in

 

Base Unit.

 

• Make sure the Nickel-Cadmium Battery Pack is

 

properly placed inside the Handset.

 

 

 

• Make sure that the charging contacts on the

 

Handset and Base Unit are clean.

Audio sounds weak and/or scratchy.

• Make sure that the Base Unit antenna is fully

 

vertical and extended.

Can’t make or receive calls.

• Move the Handset and/or Base Unit to different

 

locations and try again.

 

Check both ends of the Base Unit telephone

 

line cord.

 

• Make sure the AC Adapter is plugged into the

 

Base Unit and wall outlet.

Handset doesn’t ring or receive a page.

• Disconnect the AC Adapter for a few minutes

 

and then reconnect it.

 

• Nickel-Cadmium Battery Pack may be weak.

 

Charge the battery on the Base Unit for

 

15-20 hours.

 

• Make sure the Base Unit antenna is fully

 

vertical and extended.

 

• The Handset may be too far away from the

 

Base Unit.

 

• Place the Base Unit away from noise sources.

 

• The Digital Security Code may be erased.

 

Set the Digital Code.

 

(See page 32 for instructions).

Base Unit doesn’t ring or receive a page.

• Set the Base Unit ring vol to either “lo” or “hi”.

TROUBLESHOOTING

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents DX8200 This page intentionally left blank Contents Contents Important Safety Instructions Safety InformationBattery Safety Precautions Safety InformationRechargeable NICKEL-CADMIUM Battery Warning PrecautionsImportant Electrical Considerations Telephone Line ProblemsRange Radio InterferenceCordless Telephone Privacy More Than One Cordless TelephoneThis page intentionally left blank Introduction Important Notice IntroductionParts Checklist Parts Checklist For Australian ModelsParts Checklist For New Zealand Models Parts ChecklistDX8200 Features FeaturesThis page intentionally left blank Handset FunctionsBase Unit FunctionsConnecting the Telephone Cords InstallationSelecting a Location Telephone Line OutletsApplying Power to the Base Unit InstallationDesk or Tabletop Installation Plug the telephone line cords into the base unit as shown Direct Wall Mounting Installation Installation Setting the Handset Retainer This page intentionally left blank Installing the Handset Battery Pack Setting UP Your PhoneExtending the Base Antenna Charging the Battery Pack Setting UP Your PhoneInitial Battery Charging Place the Handset on the cradle Battery Memory Effect LOW Battery IndicatorAdjusting Ringer Volume Controls Cleaning the Battery ContactsAutomatic Digital Code Security Setting UP Your Phone This page intentionally left blank Storing Memory Dial Numbers Programming Your DX8200Entering Base Unit Memory Numbers Entering Handset Memory Numbers Programming Your DX8200Programming Entering Handset Tone/Pulse Memory Numbers Entering Base Unit Tone/Pulse Memory NumbersErasing Base Unit Memory Numbers Erasing a Stored NumberErasing Handset Memory Numbers This page intentionally left blank Answering a Call from the Base Unit Using Your DX8200Answering a Call from the Handset Making a Call from the Base Unit Using Your DX8200Making a Call from the Handset TWO-LINE OperationDialing Base Unit Memory Numbers Dialing Stored NumbersDialing Handset Memory Numbers Chain Dialing Using the Flash Button New Zealand Model onlyPlacing a Call on Hold Party Conferencing Last Number RedialPaging from the Base Unit to the Handset Using Your DX8200 IntercomPaging from the Handset to the Base Unit Call TransferTransferring a Call from the Base Unit to the Handset Using the DX8200 AS a Room MonitorAutomatic Channel Scan Feature Using the page FeatureChannel Button SpeakerphoneProblem Suggestion TroubleshootingThis page intentionally left blank Specifications For Australian Models Power Source SpecificationsOne-Year Limited Warranty WarrantyUDZZ01612BZ

DX8200 specifications

The Uniden DX8200 is a versatile and advanced two-way radio system designed for communication in various environments, including recreational activities and professional use. One of its standout features is its 40-channel capability, allowing users to communicate over a wide range of frequencies. This extensive channel availability ensures that users can find an open channel for clear communication, even in crowded areas.

The DX8200 utilizes FRS/GMRS technology, providing reliable communication over distances up to several miles, depending on terrain and conditions. Its GMRS capability allows for extended range through the use of repeaters, making it an excellent choice for both casual users and serious outdoor enthusiasts. The radio is equipped with a built-in NOAA weather radio, which can alert users of severe weather conditions, providing an added layer of safety during outdoor activities.

User-friendliness is a significant characteristic of the Uniden DX8200. Its intuitive interface features a large LCD display that is easy to read, even in low-light conditions. The controls are straightforward, allowing users to quickly change channels and adjust volume levels. Additionally, the radio includes features like channel scan and dual watch, enabling users to monitor multiple channels simultaneously.

Moreover, the DX8200 is designed with durability in mind. The unit is rugged and resistant to water and dust, making it suitable for outdoor adventures like hiking, camping, and boating. Its compact size and lightweight design further enhance portability, allowing users to carry it easily in backpacks or pockets.

The inclusion of a rechargeable battery pack is another highlight of the DX8200. This eco-friendly feature not only saves money on disposable batteries but also ensures that users have a reliable power source during extended use. The radio can also function with standard alkaline batteries, providing versatility in power options.

In summary, the Uniden DX8200 is a robust two-way radio system that combines advanced features, reliable technology, and user-friendly design. Its extensive channel selection, weather alert capabilities, durable construction, and rechargeable battery options make it a top choice for anyone in need of dependable communication in various settings. Whether for recreational use or essential communications in professional contexts, the DX8200 stands out as a reliable tool for effective and clear communication.
Top Page Image Contents