Uniden EXAI2980 owner manual Mounting the Base Unit on a Wall, Standard wall plate mounting

Page 11
G E T T I N G S TA R T E D

EXAI2980A ReSIZE-ENG 7/31 7/31/01 16:50 Page 9

Mounting the Base Unit on a Wall

Setting the handset retainer clip for wall mounting

1)On the base unit, pull the handset retainer clip out of the slot and rotate it clock- wise 180 degrees.

2)Flip the retainer clip from front to back. Slide it back into the slot so that the lip of the retainer is up and the ▼ is down. The retainer holds the handset in place.

Standard wall plate mounting

This phone can be mounted on any standard wall plate.

1) Snap the wall mount adapter into the notches on the base.

2) Plug the AC adapter to the DC IN 9V jack.

3) Wrap the AC adapter cord inside the molded wiring channel as shown.

4) Plug the AC adapter into a standard 120V AC wall outlet. 5)Place the handset on the base and charge for 15-20 hours.

6) Plug the telephone line cord into the TEL LINE jack. Wrap the cord inside the molded wiring channel as shown.

7) Plug the telephone line cord into the telephone outlet.

8) Raise the antenna to a vertical position.

9) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is f irmly seated.

Direct wall mounting

If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

• Tr y to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of suppor ting the weight of the base and handset.

•Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall

material where the base unit will be placed. 1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart.

Allow about 1/8 of an inch between the wall and screw heads for mounting the phone. 2)Set the retainer clip if necessary.

3) Refer to steps 1 through 9 above to mount the telephone.

DO NOT use an outlet controlled by a wall switch.

If you have wall mounted the base, you have to remove the beltclip to hang the handset with the display facing forward.

[ 9 ]

GETTING STARTED

Page 10 Page 12
Image 11
Page 10 Page 12
Contents R D L E S Welcome Features Contents Controls and Functions N T R O L S a N D F U N C T I O N S Read this First Checking the Package ContentsDo the following steps Setting up the PhoneLow battery alert Battery use time per chargeWall outlet Cleaning the battery charging contactsChoose the dial mode Direct wall mounting Setting the handset retainer clip for wall mountingMounting the Base Unit on a Wall Standard wall plate mountingTo change your Caller ID options/Language Setting Caller ID Options/LanguageEntering Your Area Code Press talk Listen for the dial tone Press redial/p Making and Receiving CallsRedial Adjusting the Handset Ringer and Earpiece VolumeTone Dialing Switch-over TerminologyFlash and Call Waiting Traveling Out-of-RangeSelecting a Different Channel Storing Phone Numbers and Names If you make a mistake while entering a name Steps for Entering Names and Special CharactersStandby Making Calls with Memory DialingEditing a Stored Name and/or Phone Number Chain Dialing7Press select or delete Erasing a Stored Name and Phone NumberCaller ID When the Telephone RingsDeleting all Caller ID names/numbers Viewing the Caller ID Message ListDeleting Information from the Caller ID List Deleting a Caller ID messageDial edit Using the Caller ID ListCalling a party from the Caller ID list Storing Caller ID messages in Memory dialing Turning the Answering System On/Off Integrated Answering DeviceSetting Your Outgoing Message Greeting Setting up Your Answering SystemUsing the Menu Mode Setting the Time Setting the ring time Setting a Personal Security Code PINSetting the base ringer volume Adjusting the speaker volume levelSelecting the message record time Announce only featureRepeating a Message Using Your Answering SystemPlaying your messages Voice memo Skipping a messageDeleting a message Recording a conversation Remote access away from homeTurn on the answering system remotely Changing the Digital Security Code Installing the Beltclip Headset InstallationGeneral Information MaintenanceTroubleshooting Additional Information Index At Uniden, we´ll take care of you
Top Page Image Contents