Uniden EXAI 5180 manual Setting Menu Options, Caller ID options

Setting Menu Options

There are five setup options available. They are Caller ID options (AutoTalk, CIDCW [Caller ID on Call Waiting], Area Code), Dial Mode and Language.

AutoTalk allows you to answer the phone without pressing the talk/flash button. If the phone rings when AutoTalk is on, simply remove the handset from the base and the phone automatically answers the call. If the phone rings when AutoTalk is off, you must press talk/flash to answer the call.

Caller ID options

To change your AutoTalk and CIDCW:

1) Press and hold call id/menu in standby mode. The following screen appears.

2)Use vol/ / or vol/ / to move the pointer to the selection that you would like to change.

Press select to toggle between On and Off for AutoTalk and CIDCW.

3)Press end and return the handset to the base unit to complete the setting. The handset returns to standby mode.

To enter your Area Code:

If you enter a 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number.

•If your calling area requires 10-digit dialing, do not program the Area Code option.

•The cordless phone features include AutoTalkTM and AutoStandbyTM. AutoTalk allows you to answer a call by just removing the handset from the base so you don't have to waste time pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the base.

GETTING STARTED

www.uniden.com G E T T I N G S TA R T E D [ 15 ]