Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses. Your cordless telephone stores up to 10 names/numbers in the handset.
• In memory dialing |
operation, you must |
press a key within 30 |
seconds or the phone |
will return to standby |
mode. If you return |
the handset to the |
base, the phone will |
return to standby |
mode also. |
1) Press memory in standby mode, Select Memory is displayed.
2) Press vol/ 
/ 
or vol/ 
/ 
, or enter a number
(1 - 0) to select the memory location where you would like to store the number.
3)Press memory or select.
4)Press memory or select. The Store Name screen appears and a cursor flashes indicating that the display is ready for the name to be entered.
Select Memory 01
02 JOHN DOE
01:(Empty) Press Select to edit
Store Name
• You have 30 seconds |
after pressing |
memory or select to |
enter the number you |
wish to store. |
If the Edit screen appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select Go Back to choose another location.
Edit Memory01
Delete Memory01
Go Back
Otherwise, an error |
tone will sound and |
the phone will returns |
to standby mode. |
5) To enter a name (up to 13 characters), use the number keys.
• See the "Steps for Entering Names and Special Characters" (see page 24).
• Use #/ 
and 
/tone/ 
to move the cursor to the desired location.
•Use delete/channel to delete characters as needed.
•Press and hold delete/channel to delete all the characters.
•If a name is not required, go to step 6.
[ 22 ] M E M O RY D I A L I N G | www.uniden.com |