*For Memo Record and Greeting Message Record function, the first time you enter the corresponding command, it starts the Recording function. If you want to stop the recording, enter the command again.
5)After all of the Help Guidance prompts have played, you hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart.
6)When you are finished, hang up to exit the system. The answering system automatically returns to standby.
Turn on the answering system remotely
If you have forgotten to turn on your answering system, you can turn it on remotely from any
1)Call your telephone number.
2)Wait ten rings until the system answers. You hear a beep.
3)Press 0 and then enter your PIN code. The answering system announces the number of messages stored in memory. You hear "To play incoming messages, press zero two. For help, press one zero".
4)Press 0 then 6 to turn the answering system On. You hear the outgoing message and a confirmation tone.
5)Hang up the phone and subsequent calls will be answered by the system.
[ 54 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E | www.uniden.com |