6) Press memory or select. Store Number is displayed. |
The cursor flashes indicating that the display is ready for |
the number to be entered. |
7) Use the number keys, /tone/ or #/ to enter the |
phone number. |
The phone number cannot exceed 20 digits. |
Use redial/pause to enter a pause in the dialing sequence. |
The display shows a P. Each pause counts as one digit and |
represents a two second delay of time between the digits. |
Use delete/channel to delete digits as needed. |
8) Press memory or select. You will hear a confirmation tone, |
and the following screen appears. Memory storage is |
complete. |
For example, if you store a name and number into memory |
location number 01, the display shows Memory01 Stored. |
After about 2 seconds, the following screen is displayed. |
Repeat steps 2 - 8 to store more numbers. |
Store Number
Store Number 8007303456
Memory01 Stored
01Movies
02JOHN DOE
03MOM AND DAD
The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits.
9) Press end to exit memory setup mode, returning to standby. |
www.uniden.com
M E M O RY D I A L I N G [ 23 ]