Uniden EXLA8950 manual Mounting the base unit on a wall, Standard wall plate mounting

Page 11

Mounting the base unit on a wall

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

1

2 - 7

4

Wall plate

7

3

7

5

AC outlet

1	Snap the wall mount
	adapter into the
	notches on the base.
2	Plug the telephone
	line cord to the
	TEL LINE jack and the
	AC adapter to the
	DC IN 9V jack.
3	Plug the telephone
	line cord into the
	telephone outlet.
4	Wrap the AC adapter
6	cord inside the
2	molded wiring
2	channel. Then wrap
	the cord around the
	strain relief notch.
5	Plug the AC adapter
	into a standard
	120V AC wall outlet.
6	Raise the antenna to a
	vertical position.
7	Align the mounting
	slots on the base with
	the mounting posts on
AC adapter	the wall. Push in and
	down until the phone

is firmly seated.

8

Image 11

Contents Page Introduction FeaturesTalk Long Dst Controls and functions45 46 47 Contents Handset Read this firstBase unit Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Status LED Preparing the battery packDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsOther Operations Making a callFrom the handset Sign up and Registration Placing a call using LDMLDM Long Distance Manager LDM call from the handsetDo not USE Private Branch Exchange PBX dialingHandset on the base Receiving a callFrom the handset From the baseHandset ringer switch Adjusting the ringer and earpiece volumeRedialing a call Using the speakerphoneRinger mute When speaking on the handsetMute On the handset Storing phone numbersMaking calls with memory dialing Erasing a stored phone number Way conferencing When speaking on the baseWhen the handset is off the base Intercom from the base to handset To transfer from the base to the handset Transferring a callTo transfer from the handset to the base Integrated answering device IntegrateddeviceansweringSetting the clock » Choosing between two outgoing messages Setting your greeting» Preset Message » Recording your personal outgoing message GreetingSelecting a PIN code » Announce only featureSelecting the message record time Setting ring time switch Playing your message Using your answering systemSkipping a message Repeating a message» Deleting all messages Deleting a messageVoice memo » Deleting individual messageRecording a conversation Command Function Remote access away from homeRemote room monitor Changing the digital security code To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion Handset SpecificationsGeneral Base unitW, X, Y, Z Index