Uniden EXLA8950 manual Direct wall plate mounting

Page 12

8 On the base unit, pull the

Handset retainer

handset retainer out of the slot. Rotate it clockwise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location. That could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

TOP								1 Insert two mounting screws
							3/16 in.	1 Insert two mounting screws
							3/16 in.	into the wall, (with their
								into the wall, (with their
								appropriate anchoring device),
								appropriate anchoring device),
								3-15/16 inches apart. Allow
								about 3/16 of an inch between
							3-15/16 in.	the wall and screwheads for
								mounting the phone.
								2 Refer to steps 1 through 9 on
								pages 8 and 9 to mount the
								telephone.

9

Image 12

Contents Page Features IntroductionControls and functions Talk Long Dst45 46 47 Contents Read this first Base unitHandset Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Preparing the battery pack Status LEDBattery use time per charge When the battery charge becomes lowCleaning the battery contacts Do not use any liquids or solventsMaking a call From the handsetOther Operations Placing a call using LDM LDM Long Distance ManagerLDM call from the handset Sign up and RegistrationPrivate Branch Exchange PBX dialing Do not USEReceiving a call From the handsetFrom the base Handset on the baseAdjusting the ringer and earpiece volume Handset ringer switchUsing the speakerphone Redialing a callWhen speaking on the handset MuteRinger mute Storing phone numbers On the handsetMaking calls with memory dialing Erasing a stored phone number When speaking on the base When the handset is off the baseWay conferencing Intercom from the base to handset Transferring a call To transfer from the handset to the baseTo transfer from the base to the handset Integrateddeviceanswering Integrated answering deviceSetting the clock Setting your greeting » Preset Message» Recording your personal outgoing message Greeting » Choosing between two outgoing messages» Announce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Using your answering system Playing your messageRepeating a message Skipping a messageDeleting a message Voice memo» Deleting individual message » Deleting all messagesRecording a conversation Remote access away from home Command FunctionRemote room monitor Changing the digital security code Installing the beltclip Headset installationTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion Specifications GeneralBase unit HandsetIndex W, X, Y, Z