Uniden EXLA8950 manual Battery use time per charge, When the battery charge becomes low

Page 14

Even when the battery pack is not being used, it will gradually discharge over a long period. For optimum performance, be sure to return the handset to the base unit after a telephone call for charging the battery.

Battery use time (per charge)

From fully charged

Seven hours coutinuous use.

Seven days when the handset is in the standby mode.

When the battery charge becomes low

When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the battery charge becomes low Battery lamp blinks. If the phone is in use, the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.

The built-in memory backup can hold numbers and names stored in the memory for up to 2 minutes, while you replace the battery pack.

If you must replace the battery pack during a telephone call, complete the replacement of the battery pack within 30 seconds, and you can return to the original call.

Rechargeable batteries have a memory effect that reduces standby and talk time. To avoid this memory effect, on a monthly basis, use the phone until the batt LED blinks. Then charge the battery for 12-15 hours.

Cleaning the battery contacts

To maintain a good charge, it is important to clean all battery contacts on the handset and base unit about once a month. Use a pencil eraser or other contact cleaner.

Do not use any liquids or solvents.

11

Image 14
Contents Page Features IntroductionControls and functions Talk Long Dst45 46 47 Contents Handset Read this firstBase unit Checking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitPulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Preparing the battery pack Status LEDCleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsOther Operations Making a callFrom the handset LDM call from the handset Placing a call using LDMLDM Long Distance Manager Sign up and RegistrationPrivate Branch Exchange PBX dialing Do not USEFrom the base Receiving a callFrom the handset Handset on the baseAdjusting the ringer and earpiece volume Handset ringer switchUsing the speakerphone Redialing a callRinger mute When speaking on the handsetMute Storing phone numbers On the handsetMaking calls with memory dialing Erasing a stored phone number Way conferencing When speaking on the baseWhen the handset is off the base Intercom from the base to handset To transfer from the base to the handset Transferring a callTo transfer from the handset to the base Integrateddeviceanswering Integrated answering deviceSetting the clock » Recording your personal outgoing message Greeting Setting your greeting» Preset Message » Choosing between two outgoing messagesSelecting a PIN code » Announce only featureSelecting the message record time Setting ring time switch Using your answering system Playing your messageRepeating a message Skipping a message» Deleting individual message Deleting a messageVoice memo » Deleting all messagesRecording a conversation Remote access away from home Command FunctionRemote room monitor Changing the digital security code To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Maintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion Base unit SpecificationsGeneral HandsetIndex W, X, Y, Z